ASROCK ALIVEXFIRE-ESATA2 R3.0_987 Installation Manual page 19

t
t
o
Step 10. Install the VGA card drivers to your system, and restart your computer.
Then you will find "ATI Catalyst Control Center" on your desktop.
Step 11. Double-click "ATI Catalyst Control Center". Click "View", and select "Ad-
vanced View". Click "CrossFire
TM
CrossFire " to "Yes".
View
TM
CrossFire
If you install one Radeon CrossFire
standard Radeon (CrossFire
not two Radeon CrossFire
above steps. However, although you have selected the option "Enable
TM
CrossFire ", the CrossFire
will automatically reboot. After restarting your computer, please confirm whether
the option "Enable CrossFire
not; if not, please select it again, and then you are able to enjoy the benefit of
TM
CrossFire feature.
Step 12. You can freely enjoy the benefit of CrossFire
TM
* CrossFire appearing here is a registered trademark of ATI
only for identification or explanation and to the owners' benefit, without intent to infringe.
ASRock ALiveXFire-eSATA2 Motherboard
You will find "ATI Catalyst
Control Center" on your
desktop.
TM ", and then set the option "Enable
Enable CrossFire
TM
Edition graphics card and one compatible
TM Ready) graphics card to this motherboard but
TM Edition graphics cards, please as well follow the
TM
function can not work actually. Your computer
TM " in "ATI Catalyst Control Center" is selected or
TM
feature.
TM
Technologies Inc., and is used
TM
1 9 1 9 1 9 1 9 1 9