ASROCK ALIVEXFIRE-ESATA2 R3.0_987 Installation Manual page 17

r
r
r
e
e
o
Step 3. Install the standard Radeon (CrossFire
PCIE SWITCH slot. For the proper installation procedures, please refer to
section "Expansion Slots".
Standard Radeon
(CrossFire TM Ready)
graphics card
Step 4. Install the Radeon CrossFire
proper installation procedures, please refer to section "Expansion Slots".
Standard Radeon
(CrossFire TM Ready)
graphics card
Radeon CrossFire TM
Edition graphics card
1. You are allowed to install two CrossFire
may use one CrossFire
(CrossFire TM Ready) graphics card from the same series.
TM
2. For ATI Radeon X1300 and X1600 series, there are no CrossFire
cards. You can still install two regular graphics cards from the same series (two
Radeon X1300 series cards or two Radeon X1600 series cards) on PCIE2/PCIE
SWITCH slot and PCIE3 slot to support CrossFire
monitor cable to the graphics card on PCIE3 slot.
Step 5. Correctly connect the DVI-DMS cable to the monitor connector and two
graphics cards that you install. (If you install two standard Radeon
TM
(CrossFire Ready) graphics cards to this motherboard, please skip this
step.)
DVI-DMS cable
Connect the DVI-DMS
cable to DVI connector of
the compatible standard
Radeon (CrossFire TM
Ready) graphics card.
ASRock ALiveXFire-eSATA2 Motherboard
TM
Ready) graphics card to PCIE2/
TM Edition graphics card to PCIE3 slot. For the
TM
Edition graphics cards to both slots, or you
TM Edition graphics cards and a compatible standard Radeon
TM . Besides, please connect the
DMS connector
Standard Radeon (CrossFire
graphics card
DVI connector
There are two DVI connectors on the
standard Radeon (CrossFire
graphics card. Please connect the DVI-DMS
cable to the correct DVI connector; otherwise
, the graphics card will not work.
TM
Edition graphics
DVI connector
TM
Ready)
TM Ready)
1 7 1 7 1 7 1 7 1 7