ASROCK ALIVENF5SLI-1394 User Manual page 30

How to install eSATAII?
SATAII connector
SATAII_RED (PORT 2.1)
1. In order to enable the eSATAII port of the I/O shield, you need to connect the
red SATAII connector (SATAII_RED (PORT 2.1); see p.11 No.14) and the
eSATAII connector (eSATAII_TOP; see p.11 No.37) with a SATA data cable
first.
Connect the SATA data
cable to the red SATAII
connector
(SATAII_RED (PORT 2.1))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port
of the I/O shield.
Connect one end of the eSATAII
device cable to eSATAII device
eSATAII connector
(eSATAII_TOP)
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
3 0 3 0 3 0 3 0 3 0