ASROCK ALIVENF5-ESATA2 -2943 Installation Manual page 16

eSATA II Connectors
(eSATAII_TOP: see p.2, No. 36)
(eSATAII_BOTTOM: see p.2, No. 37)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.2 No. 14)
(9-pin USB6_7)
(see p.2 No. 15)
(9-pin USB4_5)
(see p.2 No. 16)
1 6 1 6 1 6
1 6 1 6
ASRock
These two eSATAII
connectors support SATA
data cables for external
SATAII function. The current
eSATA II interface allows up to
3.0 Gb/s data transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on the motherboard.
You can also use the SATA data
cable to connect SATAII connec-
tors and eSATAII connectors
with corresponding color.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
power supply
connector of the power supply.
Besides two default USB 2.0
ports on the I/O panel, there are
four USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
ALiveNF5-eSATA2+ Motherboard