Functions; Installing Windows 2000 / Xp / Xp 64-Bit / Vista; Vista Tm 64-Bit With Raid Functions; Installing Windows ® 2000 / Xp / Xp 64-Bit With Raid - ASROCK ALIVENF5-VSTA User Manual

After that, please insert Windows
the optical drive again to continue the installation.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Install Windows
2.13 2.13 Installing Windows Installing Windows
2.13 Installing Windows 2.13 2.13 Installing Windows Installing Windows
/ Vista / Vista / Vista 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions
/ Vista / Vista TM TM 64-bit With RAID Functions 64-bit With RAID Functions
TM TM TM
If you want to install Windows
Vista TM or Windows ® Vista TM
please follow below procedures according to the OS you install.
Before installing Windows
disk is supposed to include SP4. If there is no SP4 included in your disk, please
visit the below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay
2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows

Functions

Functions Functions
Functions Functions
If you want to install Windows
SATA / SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.12.1 step 2 on
page 26.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
®
STEP 4: Install Windows
After step1, 2, 3, you can start to install Windows
64-bit OS on your system. At the beginning of Windows
third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-
ing the NVIDIA ® RAID driver. After reading the floppy disk, the drivers will be presented.
Select the drivers to install. The drivers are as below:
® Vista TM / Windows ®
Advanced screen
® Vista TM / Vista TM 64-bit OS on your system.
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
® 2000, Windows ® XP, Windows
64-bit on your SATA / SATAII HDDs with RAID functions,
®
2000 to your system, your Windows
2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID
®
® 2000 / Windows ® XP / Windows
Advanced screen
2000 / XP / XP 64-bit OS on your system.
®
2000 / Windows
2 8 2 8 2 8 2 8 2 8
Vista TM 64-bit optical disk into
IDE Configuration.
TM TM TM TM TM
® XP 64-bit, Windows
®
2000 optical
® XP 64-bit on your
IDE Configuration.
® ®
XP / Windows XP
®
setup, press F6 to install a
®