ASROCK ALIVE NFG-DVI User Manual page 35

Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU/LDT Spread Spectrum
This feature will be set to [0.75% Hershey] as default. Configuration
options: [Disabled], [0.5% Hershey], [0.75% Hershey], [0.5% Triangular],
and [0.75% Triangular].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
Dual Core Support
This item will show if you use Dual Core CPU. Configuration optiona: [Enabled],
[Disabled]. The default value is [Enabled].
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
BIOS SETUP UTILITY
Advanced
CPU Configuration
AM2 Boost
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
Cool' n' Quiet
Dual Core Support
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Processor Multiplier
Processor Voltage
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Processor Multiplier
This item will show when "Multiplier/Voltage Change" is set to [Manual];
otherwise, it will be hidden. You may set the value from [x8] up to [x25] but
no higher than the value of "Processor Maximum Multiplier". For example, if
the value of "Processor Maximum Multiplier" is [x11], the actual value of
If AUTO, multiplier and
[Disabled]
voltage will be left at the
[Auto]
rated frequency/voltage. If
[200]
Manual, multiplier and
[100]
voltage will be set based
[Enabled]
on User Selection in Setup.
[0.75% Hershey]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Screen Select Screen
Select Item Select Item
x11
+- +- Change Option Change Option
1.550 V
F1 F1 General Help General Help
[Manual]
F9 F9 Load Defaults Load Defaults
[x8]
F10 F10 Save and Exit Save and Exit
[1.500V]
ESC ESC Exit Exit
3 5 3 5 3 5 3 5 3 5
technology.
TM