CipherLab RK26 Reference Manual page 174

RK26 Mobile Computer Reference Manual v1.01
Item
Wi-Fi Frequency Band
Enable Roaming
Roaming Trigger
Roaming Delta
Enable Fast Transition
Background scan interval
Set Country Code
Enable WLAN Blacklist
Captive Portal Detection
Channel Selection
Reset to Default
Description
Automatic, 5 GHz
Select
frequency band. The default setting is Automatic.
Select whether to enable Wi-Fi roaming or not.
The signal strength when triggering Wi-Fi roaming. The higher
value means the sensitivity of triggering roaming is higher.
The qualification for roam candidates. The higher value means
the signal strength of candidate APs should be higher than the
current connected AP.
Enable 802.11r Fast Transition feature.
The frequency of background scans when the device does not
connect the internet. The shorter time means the scanning
frequency is higher.
Select the Wi-Fi country code for your device.
Deny the Wi-Fi AP (access point) which is failed to access for
several times, and add the denied AP to the blacklist.
To determine Internet connectivity when the device connects
to a network.
Select the Wi-Fi channel(s) to narrow down frequency band of
the 2.4GHz (802.11b/g/n/ax) or 5 GHz (802.11a/n/ax).
Restore all the settings in "Cipherlab Propruetary" to default.
170
2.4 GHz
only, or only for your Wi-Fi