ASROCK A770CROSSFIRE - V1.0 User Manual page 8

Table of Contents

Advertisement

- Microsoft
OS
Vista
- FCC, CE, Microsoft
Certifications
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1.
This motherboard supports Untied Overclocking Technology. Please read "Un-
tied Overclocking Technology" on page 44 for details.
2.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 15 for proper installation.
3.
Whether 1066MHz memory speed is supported depends on the AM2+ CPU
you adopt. If you want to adopt DDR2 1066 memory module on this
motherboard, please refer to the memory support list on our website for
the compatible memory modules.
ASRock website
4.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
Vista
®
bit with 64-bit CPU, there is no such limitation.
5.
This motherboard supports ATI
CrossFire
function, please follow the instructions on page 20 to reverse the
TM
direction of ASRock SLI/XFire Switch Card in advance.
6.
For microphone input, this motherboard supports both stereo and mono modes.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 12 for proper connection.
7.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 35 to adjust your SATAII hard disk drive to
SATAII mode. You can also connect SATA hard disk to SATAII connector
directly.
8.
This motherboard supports eSATAII interface, the external SATAII
specification. Please read "eSATAII Interface Introduction" on page 32 for
details about eSATAII and eSATAII installation procedures.
9.
Power Management for USB 2.0 works fine under Microsoft
Vista
64-bit / Vista
TM
Windows
XP / XP Media Center / XP 64-bit /
®
®
/ Vista
64-bit compliant
TM
TM
WHQL Certificated
®
http://www.asrock.com
. For Windows
XP 64-bit and Windows
TM
®
CrossFire
technology. If you want to use
TM
TM
/ XP 64-bit / XP SP1 or SP2.
TM
8 8 8 8 8
XP
®
Vista
64-
®
TM
Windows
®
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

A770crossfire

Table of Contents