Ide Configuration - ASROCK 939SLI32-ESATA2 User Manual

3.3.4 IDE Configuration

3.3.4 3.3.4 IDE Configuration IDE Configuration IDE Configuration
3.3.4 3.3.4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
[Enabled]
Serial ATA Controller
SATA Operation Mode
[RAID]
eSATAII Support [Enabled]
Primary IDE Master
[Not Detected]
Primary IDE Slave [Not Detected]
Secondary IDE Master
[Not Detected]
Secondary IDE Slave
[Not Detected]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Serial ATA Controller
Enable the SATA controller by selecting [Enabled]. The default value of this
option is [Enabled]. Configuration options: [Enabled] and [Disabled].
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [RAID]. Configuration options: [RAID], [non-RAID] and [AHCI].
eSATAII Support
Use this item to enable or disable eSATAII support. The default value of this
option is [Enabled]. Configuration options: [Enabled], [Disabled].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "Primary IDE Master" as the example in the following instruction,
which can be applied to the configurations of "Primary IDE Slave", "Sec-
ondary IDE Master", and "Secondary IDE Slave" as well.
Disabled
Enabled
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 1 4 1 4 1 4 1 4 1