ASROCK 939SLI32-ESATA2 User Manual page 22

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.9 No. 21)
USB 2.0 Header
(9-pin USB45)
(see p.9 No. 23)
Infrared Module Header
(5-pin IR1)
(see p.9 No. 25)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.9 No. 29)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.9 No. 28)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
ASRock eSATAII+1394 I/O
USB_PWR
accommodates 4 default USB
P-7
P+7
GND
2.0 ports. If those USB 2.0 ports
DUMMY
on the I/O panel are not sufficient,
1
this USB 2.0 header is available
GND
P+6
P-6 to support 2 additional USB 2.0
USB_PWR
ports.
ASRock eSATAII+1394 I/O
USB_PWR
accommodates 4 default USB
P-5
P+5
GND
2.0 ports. If those USB 2.0 ports
DUMMY
on the I/O panel are not sufficient,
1
this USB 2.0 header is available
GND
P+4
to support 2 additional USB 2.0
P-4
USB_PWR
ports.
IRTX
This header supports an
+5VSB
DUMMY
optional wireless transmitting
1
and receiving infrared module.
GND
IRRX
This connector allows you
to receive stereo audio input
CD-R
GND
from sound sources such as
GND
CD-L
a CD-ROM, DVD-ROM, TV
CD1
tuner card, or MPEG card.
GND
This is an interface for front
PRESENCE#
MIC_RET
OUT_RET panel audio cable that allows
convenient connection and
1
control of audio devices.
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
2 2 2 2 2 2 2 2 2 2