Cpu Configuration - ASROCK 939SLI32-ESATA2 User Manual

3.3.1 CPU Configuration

3.3.1 3.3.1 CPU Configuration CPU Configuration CPU Configuration
3.3.1 3.3.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Spread Spectrum
Boot Failure Guard
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Memory Clock
Flexibility Option
CAS Latency
TRAS
TRP
TRCD
TRRD
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration
options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency. The range is from 150MHz to
400MHz. The default value is [200].
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency. The range is from 75MHz to
200MHz. The default value is [100].
PCI Frequency (MHz)
Use this option to adjust PCI frequency. This option only appears when
you set overclock mode to [CPU, PCIE, Sync.] or [CPU, PCIE, Async.]. Con
figuration options: [33.33], [33.80], [34.28], [34.78], [35.29], [35.82], [36.36],
[36.92], [37.50] and [Sync. with CPU]. The default value is [33.33].
Spread Spectrum
This feature will be set to [Auto] as default.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
If AUTO, multiplier and
[Auto]
voltage will be left at the
[200] rated frequency/voltage. If
[100]
Manual, multiplier and
[Auto] voltage will be set based
[Enabled] on User Selection in Setup.
[Enabled]
x11 2200 MHz
1.450 V
[Auto]
Select Screen Select Screen
[Auto]
Select Item Select Item
[Disabled]
+- +- Change Option Change Option
[Auto]
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Auto]
F10 F10 Save and Exit Save and Exit
[Auto]
ESC ESC Exit Exit
[Auto]
3 6 3 6 3 6 3 6 3 6
TM technology.