Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tamco 8800 Series
Summary of Contents for Tamco 8800 Series
- Page 1 HEAVY-DUTY CONTROL DAMPER INSTALLATION GUIDELINES - OPERATION - MAINTENANCE...
-
Page 2: Storage Recommendations
• In applications where the humidity level is unusually elevated, or where there are extremely high levels of dust and dirt particles, TAMCO recommends that the damper linkage and bearing system should be cleaned once a year. This can be done by blowing away dust using compressed air. - Page 3 9 Do not install damper if damage is more than superficial, if uncertain as to extent of damage, or if damper does not seal correctly call TAMCO Customer Service at 1-800-561-3449. 9 Operate damper section manually (on a flat section of floor) to verify correct blade action and sealing.
- Page 4 INSTALLATION GUIDELINES | for TAMCO Aluminum Control Dampers SECTION DRIVE SIDE RIGHT HAND DRIVE LEFT HAND DRIVE • Drive side will affect the direction the blades rotate to open and thereby affect the angle of airflow when parallel blades are not in the...
- Page 5 (See illustration to right.) • Field-supplied tubular structural steel support may be required for large multi-sectioned dampers. • A TAMCO Series 8800 damper weighs approximately 7 lbs/ft² (34.2 kg/m²). MAXIMUM DEFLECTION: • The structure providing intermediate support must be designed to resist the highest pressure load, with deflection of less than L/230.
-
Page 6: Guide For Troubleshooting
• Ensure that the top or bottom frame members are not distorted, by loosening fasteners and shimming the frame, if required. DO NOT ADJUST LINKAGE MECHANISM. IF PROBLEM STILL EXISTS AFTER VERIFICATION AND CORRECT ACTION, CALL TAMCO CUSTOMER SERVICE 1-800-561-3449 SPX ENGINEERED AIR MOVEMENT...
Need help?
Do you have a question about the 8800 Series and is the answer not in the manual?
Questions and answers