Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tamco 1000 Series
Summary of Contents for Tamco 1000 Series
- Page 1 HORIZONTAL JACKSHAFT INSTALLATION GUIDELINES - OPERATION - MAINTENANCE...
-
Page 2: Storage Recommendations
• In applications where the humidity level is unusually elevated, or where there are extremely high levels of dust and dirt particles, TAMCO recommends that the jackshaft bearing system and moving parts should be cleaned once a year. This can be done by blowing away dust using compressed air. - Page 3 INSTALLATION GUIDELINES | TAMCO Horizontal Jackshafts Series 1000, 1500, 9000, 9000 BF, 1000 FB, 1500 FB, 9000 FB Installation design may require jackshaft rod and brackets to be fitted before damper is installed. This could occur due to NOTE: lack of space between damper frame and duct work needed for hardware fastening tools.
- Page 4 INSTALLATION GUIDELINES | TAMCO Horizontal Jackshafts Series 1000, 1500, 9000, 9000 BF, 1000 FB, 1500 FB, 9000 FB Installation design may require jackshaft rod and brackets to be fitted before damper is installed. This could occur due to NOTE: lack of space between damper frame and duct work needed for hardware fastening tools.
-
Page 5: Installation Procedure
INSTALLATION GUIDELINES | TAMCO Horizontal Jackshafts Series 1000, 1500, 9000, 9000 BF, 1000 FB, 1500 FB, 9000 FB THREE-SECTION JACKSHAFT INSTALL ATION PROCEDURE 1. Install the double bridge bracket assembly to damper frames 6. Retighten hex nuts on all three U-bolts, securely fastening blade where the damper sections meet. - Page 6 HORIZONTAL JACKSHAFT INSTALLATION GUIDELINES - OPERATION - MAINTENANCE SPX ENGINEERED AIR MOVEMENT 80 Lorne Street TA-IOM-JSH-24 | ISSUED 01/2024 Smiths Falls, ON K7A 5J7, Canada © 2024 SPX Engineered Air Movement | All rights reserved 800 561 3449 In the interest of technological progress, all products are tamcodampers.com subject to design and/or material change without notice.
Need help?
Do you have a question about the 1000 Series and is the answer not in the manual?
Questions and answers