Oven Cleaning - Mini Oven - NEFF U1524N0GB How To Connect

Oven Cleaning
– mini oven
Automatic oven cleaning
Setting procedure
Switching off oven cleaning
When the oven has
cooled down
}
Oven cleaning
If the self-cleaning panels in the oven are no longer
adequately cleaned during normal day-to-day
operation, they will be regenerated with this function.
They will then be fully functional again.
Take the accessories and utensils out of the
oven.
Before switching on automatic oven cleaning,
thoroughly clean the areas of the oven that do not
have self cleaning panels, e.g. enamelled areas such
as the oven floor, inner door. This will prevent residue
from burning in.
The oven becomes very hot during automatic
oven cleaning – always keep children away.
1.
Rotate the function selector to bottom/top
heating
Cleaning
Heat up the oven for 1 hour.
2.
Rotate the temperature selector and the function
selector to 0.
The oven is cooled by the fan which continues
running.
Remove the grease film from the parts which are not
self-cleaning with a damp cloth.
Wipe the salt residue off the self-cleaning parts with
a damp cloth.
Replacement side, roof and rear panels are available
from customer service.
Note: exchange of roof and rear panels should only
be carried out by an approved service engineer.
}
is a regeneration programme.
/
and the temperature selector to Oven
}
(270° C).
39