Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MechMaxx EH50
Summary of Contents for MechMaxx EH50
- Page 1 WARRANTY Operator’s Manual www. mechmaxx.com...
-
Page 3: Table Of Contents
SPECIFIC SAFETY RULES UNPACHING THE CONTAINER LUBRICATING THE WHEELS CONTENTS SUPPLIED TIRES TO-SCALE HARDWARE HARDWARE ASSEMBLY WIRE CONNECTIONS HANDLE BAR BRAKE SYSTEM LIGHTING LAMP CHARGER FRONT WHEEL BATTERY REAR WHEEL STORAGE TROUBLESHOOTING DUMPER BOX KNOW YOUR MACHINE www. mechmaxx.com TABLE OF CONTENTS... -
Page 4: Specifications
SPECIFICATIONS Model EH50 Motor 1000 W brushless DC motor Battery 48 V 32 Ah lead-acid battery Brake system Electromagnetic brake Monitor Electric quantity, Voltage Lighting lamp 2 (pcs) 30 W Working time 8-10 hours Charging time 6-7 hours Charging current 4.5 A... -
Page 5: Safety Signs
When reversing, make sure Keep your hands and feet away that there is nothing behind from the wheels and moving you. parts. www. mechmaxx.com SAFETY SIGNS... -
Page 6: Safety
Do not overreach. Keep proper footing and balance at all unexpected situations. times. This enables better control of the power tool in unexpected situations. www. mechmaxx.com SAFETY... -
Page 7: Battery Tool Use And Care
Walk, never run with the machine. temperature of 18 - 24°C (65 - 75°F) to ensure the longest battery life and best performance. Do not charge or store the battery pack in temperatures below O°C (32 °F) and above 45°C (113°F). www. mechmaxx.com SAFETY... - Page 8 .There are special hazards for dumpers working on soft ground and when the load is sticking to body e.g. wet clay. www. mechmaxx.com SAFETY...
-
Page 9: Unpaching The Container
UNPACHING THE CONTAINER Use the screwdriver and hammer to open all the side locks. www. mechmaxx.com UNPACHING THE CONTAINER... -
Page 10: Contents Supplied
The Electrical wheelbarrow comes partially assembled and is shipped in carefully packed package. After all the parts have been removed from the package, you should have: Dumper Box Main Frame Wheels Rear Wheel Handle Bar Lighting Lamp Verify all component and hardware quantities are correct prior to assembling the Wood chipper. www. mechmaxx.com CONTENTS SUPPLIED... -
Page 11: To-Scale Hardware
Hardware graphics are printed at 1:1 scale for ease of identification. Simply place the hardware over the image in the tables to verify it is the correct size. Hex bolt Flat washer M8 X 20mm Hex bolt M8 X 25mm 11 X www. mechmaxx.com TO-SCALE HARDWARE... -
Page 12: Assembly
Mount the light and fasten it with M8x20 nuts.(See Figure 4) Figure 2) Figure 4 Figure 2 Spring washer 8 Spring washer 8 Hex bolt M8X 20mm Hex bolt M8 X 20mm Flat washer 8 Flat washer 8 www. mechmaxx.com ASSEMBLY... -
Page 13: Dumper Box
DUMPER BOX Mount the dumper box and fasten it with M8 nuts.( See Figure 5) Figure 5 Figure 5 www. mechmaxx.com ASSEMBLY... -
Page 14: Know Your Machine
When you want to turn right or left,firmly hold the handle LIGHT bar to control the Universal Wheels to turn right or left. You can turn on the light when the light is not good. the machine will run forward and backward directly. www. mechmaxx.com KNOW YOUR MACHINE... -
Page 15: Electrical Wheelbarrow Operation
-Tightening of parts: check for any loosening and solve it. -Transmission clutch lever: check operation. -Steering clutch levers: check operation. -Container box: check that it is locked in the lowered position For all detailed maintenance activities, refer to Mainte- nance'chapter. www. mechmaxx.com ELECTRICAL WHEELBARROW OPERATION... -
Page 16: Driving
1 position. working on slopes. -The turn may be abrupt. Make sure the load is well secured to the box. Pay partic- ular attention when steering on slopes. www. mechmaxx.com ELECTRICAL WHEELBARROW OPERATION... -
Page 17: Load Limits
221 lb, for slopes between 10° and 15° (17%÷26%) 2. Turn the battery switch to OFF position. -Max load height (from bottom surface of the box) = 12 in for descent 20 in for ascent *from bottom surface of the box www. mechmaxx.com ELECTRICAL WHEELBARROW OPERATION... -
Page 18: Maintenance
Usually check the carbon brush of the motor,need to 8. During storage, disconnect the batteries from the change new one if severe wear. motor unit by separating the connectors and eventually the cables from the terminals. www. mechmaxx.com MAINTENANCE... -
Page 19: Troubleshooting
If your battery does not make noise or swell slightly slightly while charging.and during charging,it does not mean that it is not is not reason for concern. accepting the charge www. mechmaxx.com TROUBLESHOOTING... - Page 20 One or more tires are flat. Tire puncture. Patch or replace damaged inner Tube. Leaky tire air valve. Replace or tighten tire air valve. Hardware has become loose. Retighten all hardware using tools Machine feels loose or less solid then initial assembly www. mechmaxx.com TROUBLESHOOTING...
- Page 22 info@mechmaxx.com...
Need help?
Do you have a question about the EH50 and is the answer not in the manual?
Questions and answers