You can secure your appliance from being by a responsible person. unintentionally the programme terminated – Do not lean or sit on the open door. (e.g. improper operation by children). The appliance could tip. Activating the button lock: –...
Diagrams of the control panel and the power supply. Pull out the mains plug interior of the appliance can be found in or switch off the fuse. Turn off the tap. the envelope at the front. Disposal Individual positions are referred to in the text.
39‒44 5.5‒6,2 from : to : Salt is not required at the set value : – Find out about the hardness value of your tap water. Your water utility company will help you with this. – Set value can be found in the water hardness table.
You will destroy the water The water is displaced and runs out. softening system. As soon as the salt refill indicator @ on – To prevent corrosion, always refill with the fascia is lit, top up the salt. salt immediately before switching on the appliance.
. This is the factory As soon as the rinse-aid refill indicator H setting : is lit on the fascia, there is still a rinse-aid Do not change the amount of rinse aid reserve of 1 – 2 rinsing processes. Refill unless streaks (select lower setting) or with rinse aid.
Hot utensils are sensitive to shock! Therefore, when the programme ends, Not suitable leave the utensils to cool down in the – Cutlery and utensils made of wood. dishwasher until they can be handled. – Delicate decorative glasses, craft and Basket 1B antique utensils.
Folding spikes * Detergent * depending on model The spikes can be folded down to improve You can use tablets as well as powder arrangement of pans, bowls and glasses. or liquid detergents for dishwashers, but never use washing up liquid. The dosage...
Adding detergent Combination detergent – If the detergent dispenser 1R is still Apart from conventional detergents (Solo), closed, press the lock 1Z to open the a number of products are offered with detergent dispenser. additional functions. These products contain not only the detergent but also...
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options Prerinse pots and pans, very adhesive burned- Clean 70°...
* depending on model Additional options can be set with the The programme data (consumption buttons X. values) can be found in the summary of instructions. They refer to normal Ÿ Express Wash * conditions and the water hardness set value : .
Otherwise, expansion (pressure) may cause the appliance door to Timer programming * spring open or water to run out of the * depending on model appliance. You can delay the start of the programme – To continue the programme, switch on the ON/OFF switch ( again.
The set value is saved. Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces.
Spray arm The filters 1* keep large foreign objects Limescale and dirt from the rinsing water in the rinsing water away from the pump. may block nozzles and the bearing assemblies of the spray arm 1". These foreign objects may occasionally block the filters.
– Scoop out water, use a sponge if ã= required. Warning – Loosen screws on the pump cover If on the digital display )" an error code (Torx T 20) and pull off. to : ), always disconnect the appliance from the power supply and then turn off the tap.
– Turn on the tap. utensils basket overfilled. – Switch on the appliance. – Too little detergent. – Water is left in the appliance at the – Rinse programme too weak. end of the programme. – Spray arm rotation obstructed.
When calling , please quote the appliance number (1) and the production date – No/too little rinse aid. (FD = 2) which can be found on the rating – No/too little special salt. plate 1b on the appliance door. – Water softening system set to the wrong value.
Delivery following paragraphs or in the installation Your dishwasher has been checked instructions. thoroughly in the factory to ensure that it is Install the appliance in the correct in working order. This may cause small sequence: water stains. These will disappear after the –...
If current only, ranging from 220 V to required, fit a siphon with an drainage 240 V and 50 Hz or 60 Hz via connection. a correctly installed socket with protective earth conductor. See rating –...
– WEEE. The guideline specifies the framework for an EU-wide valid Protection against frost return and re-use of old If the appliance is in a room where there is appliances. a risk of frost (e.g. holiday home), empty the appliance completely (see Transportation).
Page 23
Childproof lock (door lock) * To open the door, move lever to right and pull door handle. Always close the appliance door completely when you leave the appliance. This is the only way you can protect your children from potential dangers.
Page 24
If your appliance is fitted with Aqua-Stop, you can leave your appliance unattended during operation and leave the tap turned on afterwards. The tap should only be turned off if you are absent from home for a prolonged period, e.g. several weeks holiday.