Table of Contents
Advertisement
en
... on the appliance
Spray arm rotates sluggishly.
– Spray arm blocked.
Cover on the detergent dispenser cannot
be closed.
– Detergent dispenser overfilled or
mechanism blocked by sticky
detergent residue.
Detergent residue in the detergent
dispenser.
– Dispenser was damp when filled.
"Check water supply" display 8 lights
up.
– Tap turned off.
– Water supply interrupted.
– Supply hose kinked.
– Filter in the water supply blocked.
– Switch off the appliance and pull
out the mains plug.
– Turn off the tap.
– Clean filter in the supply hose.
– Reconnect power supply.
– Turn on the tap.
– Switch on the appliance.
– Water is left in the appliance at the
end of the programme.
– ( :
) Waste water hose is blocked
or kinked.
Filters blocked.
– ( :
) Waste water pump blocked,
cover on the waste water pump is
not locked in position
(see Maintenance and care).
– Filters blocked.
– The programme has not yet ended.
Wait until programme ends (digital
display indicates :
implement the "Reset" function.
18
Refill indicator for salt @ and/or rinse-
aid H is not lit.
– Refill indicator/s switched off.
– Adequate salt/rinse-aid available.
Refill indicator for special salt @ is lit.
– No salt.
– Sensor does not detect salt tablets.
... during the wash cycle
Unusual foam formation.
– Handwash liquid in the rinse aid
Appliance stops during the wash cycle.
– Power supply interrupted.
– Water supply interrupted.
Filling valves making striking noises
– Caused by the installation of the water
Knocking/rattling noise during rinsing
– Spray arm is striking utensils.
– Utensils not arranged correctly.
... on the utensils
Food residue on the utensils.
– Utensils placed too closely together,
– Too little detergent.
– Rinse programme too weak.
– Spray arm rotation obstructed.
– Spray arm nozzles blocked.
– Filters blocked.
– Filters incorrectly inserted.
– Waste water pump blocked.
Tea or lipstick residue is not completely
removed.
– The detergent has an inadequate
– Too low rinsing temperature.
– Too little/unsuitable detergent.
) or
Refill with special salt.
Use different special salt.
dispenser.
Spilled rinse aid causes excessive
frothing, therefore please remove with
a cloth.
line and has no effect on the function
of the machine. Remedial action is not
possible.
utensils basket overfilled.
bleaching effect.
Advertisement
Table of Contents
