Selecting Options/Standard Settings - NEFF S4409N1GB Instructions For Use Manual

en
Programme data
The programme data (duration, energy
and water consumption) can be found in
the summary of instructions and refers to
standard conditions. Greater deviations
may be caused by:
different quantities of utensils
inlet temperature of the water
water pressure
ambient temperature
mains voltage tolerances
and appliance-specific tolerances
(e.g. temperature, water flow rate, etc.)
Only ranges can be indicated for the
automatic programmes.
The water consumption values refer
to water hardness value 4.
22
Selecting options/
standard settings
Operating principle
From the Main Menu you can select the
following options/settings by repeatedly
pressing the button M/OK
Time Pre-select
Remote Control **
Reduce Time
Drying Level
Buzzer Volume
Adding Rinse Aid
Water Hardness
Language
Standard Programmes
Remote Setting **
** Only with installed serve@Home
interface
Within an option/basic setting there are
several possible settings that can be
selected using the buttons – or +
A selected setting is applied by
changing to the next option/basic
setting using the button M/OK
If a setting has been changed using the
buttons – or + and stored using M/OK
, the message "Value stored" will be
2
displayed and the display returns to the
Main Menu.
:
2
.
3
.
2