Immediately check the packaging and assembly instructions. dishwasher for any damage which may The dishwasher must NOT be have been caused in transit. Do not use connected to the power supply during a damaged appliance, but consult your installation. supplier.
Page 5
(Risk of injury) repairs or other work are started. Pull Covers are available as optional the mains plug out of the wall socket or accessories from customer services or switch off at the fuse box. Grasp the specialist stores.
This dishwasher is equipped with touch buttons. A gentle touch starts the function. Always keep the user interface clean and free of grease in order to prevent malfunctions. Use a dry or lightly moistened cloth only, do not use scouring or abrasive detergents.
Before using your appliance for the first time Before you can use your appliance for the first time, you must select the language. When the appliance has been switched on, the following display is output: < > – DE EN FR NL IT EL The language abbreviation “DE”...
M/OK The lime-containing solution drains from If you do not want to refill the salt now you the dishwasher. Afterwards the softening can skip the display “Refill Salt” by system is ready to be loaded again.
Switch on the appliance with the main dishes and interior containers. switch . The main menu is If the tap water exceeds a certain level of displayed (if switching on the appliance hardness, it must be softened, i.e., for the first time, only when a language...
Therefore, remove any If you want to fill in the rinse aid at a later spilt rinse aid with a cloth. time you can skip the display “Refill Rinse Aid” by pressing the button M/OK...
Cutlery and dishes made of wood. They water temperature and duration of will leach out and become unsightly; the dishwasher programme. utilised adhesives are also not suitable Suggested remedy: for the dishwasher temperatures.
Very small items should not be washed in Pots and pans the dishwasher as they could easily fall out Lower basket of the baskets.
Page 13
* some models dishwasher always unsorted and with the Light-weight plastic accessories, e.g. cups, eating surface pointing downwards. The lids, etc. can be held securely in the small spray jet is then better able to reach the accessories holder. individual parts.
Page 14
Before you re-insert the basket, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray Top basket with side levers arm will not connect to the water circuit.
* some models Notes on detergents You can clean large baking sheets or You may use any brand of liquid or powder grilles with the baking sheet spray head. detergent, as well as tablets, that have To do this, remove the top basket and...
Page 16
The lower and middle lines in the dispenser indicate15 ml and 25 ml of detergent respectively. The dispenser can be filled with 40 ml of detergent when the door is opened horizontally. Filling with detergent Pour detergent into the dispenser.
Opening and closing the door To open the door, pull the door handle. To close the door, press the door shut until it “clicks” into position. The door can be easily opened before the wash programme starts and when the programme ends.
To take advantage of this mobility, at home as well as on the road. service you must set the dishwasher’s In order for your dishwasher to become mode to “Remote Control: On”.
Using the following programme overview the optical limescale sensor even if you can select the appropriate programme combined cleaning products are used. for the type, amount, and soil level of the dishes.
Page 20
Optimum rinsing and drying results can be By pressing buttons – or + obtained by using standard detergents in select a set value between 0 (off) and 7. conjunction with separate application of The factory setting is “hardness auto”. salt and rinse aid.
WASH WASH 60 – 70 45 – 55 35 – 45 Programme Prerinse progress The programme progress is Clean optimised and adjusted according to the appliance Intermedi- load and degree of soiling ate wash on the utensils. Final wash Drying...
Operating principle the summary of instructions and refers to standard conditions. Greater deviations From the Main Menu you can select the may be caused by: following options/settings by repeatedly different quantities of utensils...
Page 23
Start Button counting backwards. When the set time has elapsed the If you do not want to use “Reduce programme will start automatically. Time” the next time you use the Until the programme starts you are able dishwasher, you must deselect this to change the set time and programme.
Page 24
Adding Rinse Aid Language You can set the amount of rinse aid You can change the language selected added. when the appliance was started for the first time (see chapter “Before Starting The If the option “Adding Rinse Aid” is Device For The First Time”).
Page 25
We recommend on principle to use the Auto Programmes because they keep the water and energy consumption as low as possible due to the variable programme run. In the case of the standard programmes on the other hand, the programme run is predetermined.
Page 26
The programme and other settings can still be changed as long as the door is still The Aqua sensor is used according to open after pressing the button “Start”...
Page 27
If the device becomes disconnected from out. the power supply during operation (e.g. The message “Cancel Programme” will it is switched off or there is a power cut), be displayed, alternating with the all settings remain stored. Operation will message “Close the door”, the...
Information about programme sequence When the appliance has started, the following displays are indicated. Recalculating time remaining The expected programme duration is recalculated depending on the amount and Recalculating time degree of soiling of the dishes. Finished in x.xx hours Displays the remaining running time of the programme.
Page 29
Information about programme sequence Wash The dishes are optimally washed with detergent and heated water. Wash Rinsing with rinse-aid To prevent water marks on the dishes, rinse-aid is automatically added. Rinse Drying The dishes are now dried. Drying The programme has ended. The dishes...
Insert the filter system and screw down with the filter cylinder. window. Rinse aid When the rinse aid level is low, your dishwasher displays a message in the window. Filters The filters prevent larger remnants of food or other objects from getting inside the pump.
Page 31
. left in the water can cause a blockage in the pump. The water is no longer pumped Inspect the nozzles in the spray arms out of the dishwasher and it can be seen for blocked holes due to remnants of covering the filter.
Mains water tap is not opened. having to call out a service engineer. Not Open the tap fully and press the only does this save costs, but it also button M/OK of the device.
Page 33
Knocking sound coming from inlet Compartment was damp when it valves was filled up with detergent. This is caused by the way the Compartment must be dry before water pipes have been laid and it detergent is added. has no effect upon the way the Refill display does not light up.
Page 34
Items were removed from dishwasher too soon. Glasses have a dull appearance Amount of rinse-aid was set too low. Tea stains or traces of lipstick have not been completely removed Detergent does not have a sufficient bleaching effect. Washing temperature was set too low.
Customer Service Notes Please call your local service agent, if you Disposal of your old appliance are not able to resolve any problem Old appliances are not worthless rubbish. yourself. The name of your nearest service Valuable raw materials can be reclaimed agent is shown in the Customer Service by recycling old appliances.
The specifications for supply, secured to prevent them from falling drainage and connected load must fulfil over, e.g. by screwing them to the wall the required criteria as stated in the or by installing them under a continuous following paragraphs or in the installation worktop which is screwed to the instructions.
Page 37
Pull out the mains plug. Turn off the water supply. When replacing the appliance, always Disconnect the waste water and fresh connect a new water supply hose to the water connections. water supply. The old supply hose must Loosen the fastening screws under the not be re-used.