Intermatic Wise Electric Rect-S9 Quick Start Manual

Wise Electric
Rect - S9
24 hour timer
www.wise-electric.co.il
Wise Electric
WISE ELECTRIC ISRAEL LTD
Address: 30 Shaham,
Petach-Tikva,
ISRAEL
www.wise-electric.co.il
1. DESCRIPTION
S9 is a reliable 24-hour timer includng 2 Pole Switch
for Flush mount installation in Rect box. The timer
enables to schedule a very accurate ON/OFF events
for the connected devices & appliances.
2. SPECIFICATIONS
• Mechanism Approvals:
• Supply voltage: 220–240V 50Hz
AC
• Max Load: 16A (8A)
• 2 Pole Rocker Switch:
ON - OFF -
• Operating temperature: 0°C to 45°C
• Product dimensions: - Length 13.5
CM
- Width 8
CM
- Height 0.6
CM
• Installation data: Suitable for Rect box 4 modules
Recommended DEEP Type box
• Installation cables (cross section): 0.5mm² -2.5mm²
• Operating Data: - Timer mode
(2 Pole Rocker Switch - )
- Manual mode
(Output according to 2 Pole Rocker Switch)
• Minimum ON/OFF event: 20 minute
• 72 operations per day
M ~
5 4 3 2 1
Main
Push
Button
N L L N
Switch
Appliance
Supply
OUT IN
4.4 Fit module to socket box with two screws.
4.5 Assemble screws cover.
3. PRODUCT SAFETY INFORMATION
Warning
Prior of use, please examine and verify that the
product is not defected. Please do not use or operate if
there is a defect of any kind.
Warning
Installation of an electrical wiring device should be
done by a professional person only.
Warning
Do not turn the dial counter clockwise!
Doing it will damage the Mechanism and
it is not covered by the Warranty Terms.
5. TIME SETTING
To set the current time, turn the dial clockwise until
the arrow is directed to the current time.
Note:
The Timer is marked 24 hour,
therefore you must choose the exact
hour of the day. For example: to set
the current time to two afternoon, the
arrow should be directed to 14 and not to 2.
Warning
Do not turn the dial counter clockwise.
Doing it will damage the Mechanism and it is
not covered by the Warranty Terms
4. INSTALLATION
Warning
Installation of an electrical wiring device should be
done by a professional person only.
4.1 Switch off supply to socket box.
4.2 Remove frame cover with screwdriver.
Fig. A
4.3 Connect wiring in accordance with wiring diagram.
Do not combine solid and flexible conductors in the
same terminal. When connecting flexible
conductors use terminal ends.
6. SELECT OPERATING MODES
6.1 Main Rocker Switch
To switch on and off, you can press
the main switch. Note that if the switch
is in OFF mode, the timer will not operate
according to the schedules that have been set.
6.2 Clock modes
2-position handle for Timer
selecting operating mode:
7. SCHEDULE ON/OFF EVENTS
Set the 2-position Handle to be in Timer Mode, then move
the Tappets outward to be in OFF position. To Schedule
ON/OFF events, move the Tappets inward to be in ON
position only at desired operating times. Each Tappet
represents a 20-minute operating time For example: For
the timer to operate between 5:00 and 6:00 in the morning,
and between 18:00 and 19:00 in the evening, the Tappets
should be moved inward at the appropriate times as
shown in the illustration.
Operating time
5:00 - 6:00
Operating time
18:00 - 19:00