Page 1
Computer control Contents and design may change from time to time without notice. An HAE69C mount is used here for illustration. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com...
Page 2
2X Azi Adjustment Screws. Locking Lever on the RA base. An HAE29C or HAE43C does not have the auxiliary locking lever. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com...
Page 3
HBX port on the mount. To use the mount near the equator, change the latitude range settings to 0°~30°. To use the mount at iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com...
Page 4
Please refer to online full operation manual for more then press ENTER. Follow the online instruction to detailed information. complete the process. The Zero Position can be set iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com...
Page 5
Refer to the iPolar Operation Manual from iOptron’s Rev. 2.0 April 2024 website to perform the polar alignment, or steps briefly outlined below: iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com...
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.
Need help?
Do you have a question about the HAE29C and is the answer not in the manual?
Questions and answers