Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Alfano Manuals
  4. Measuring Instruments
  5. PRO+ LV A-145
  6. User manual

Alfano PRO+ LV A-145 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
PRO+ LV
A-145
User Manual (EN)

Advertisement

loading
Need help?

Need help?

Do you have a question about the PRO+ LV A-145 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alfano PRO+ LV A-145

Summary of Contents for Alfano PRO+ LV A-145

  • Page 1 PRO+ LV A-145 User Manual (EN)
  • Page 2 PRO+ LV A-145 Copyright  2005 Alfano, S.A. All rights reserved.
  • Page 3 95% of the memory’s capacity. NOTE: this mode is necessary for an in-depth analysis of the data with the software VISUALDATA. Afterwards, ALFANO automatically proceeds to mode 2. 2) Mode 2 (ENDURANCE) the system halts the registration every 0.1 seconds to leave space for the registration of the times with maximums and minimums (RPM, speed, temperatures, pressures) for every lap and for more than 24 hours.

  • Page 4: Replacing The Batteries

    START mode and access the menu « Config System ». Note: a power cut while the ALFANO is in the START mode risks provoking a deterioration of the registered information.

  • Page 5: The Stop Mode

    After 10 seconds or after having >> Return to STOP. pressed the button (EXIT): This screen will show you that: You have another 69 minutes of registration time in the PRINICIPAL mode. (PRINCIPAL mode, see page 3). Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 6 NOTE: the 2 counters « 1 and 2 » are reset to zero only during the erasing of the data by the menu « 0.6 RESET ». This screen will show you: (16) Number of exits (013) Number of laps of the last exit (129) Number of laps (total) Copyright  2005 Alfano, S.A. All rights reserved.

  • Page 7: System Off

    To analyze the lap by 0.1 second with the Press the right button 1 sec. on (VIEW): >> left and right buttons. Press the left button 1 sec. on (EXIT): >> To exit. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 8 >> time. Press the left/right button: >> To exit. NOTE: Pressing the left button for 1 second at the start of any menu will make the system return to the STOP mode. Copyright  2005 Alfano, S.A. All rights reserved.

  • Page 9: Configuration Menu

    NOTE: This menu is only accessible when one single field is configured in menu 10. This configuration is useful: either to ignore one or several split times, or to avoid acquiring other infrared ALFANO emitters placed on the circuit at an untimely moment. This configuration does indeed allow you to program a time upon which the system will not react after having acquired the time per lap.
  • Page 10 UP arrows: Continue to press or successively press the >> To reduce the RPM of LED 1. right button on the DOWN arrows: Press the left button: >> To regulate LED 7. Copyright  2005 Alfano, S.A. All rights reserved.
  • Page 11 Continue the same operations to regulate the other LEDs one by one until LED 10. Press the left button: >> To exit. Menu 16 : ALARM T° Regulating the 4 bright detector lights, LOW temperature and HIGH temperature of: Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 12 DOWN arrows : Continue to press or successively press >> To increase the Circumference. the right button on the UP arrows : Press the left button : >> To exit the menu. Copyright  2005 Alfano, S.A. All rights reserved.
  • Page 13 NOTE: when the LAMBDA sensor is in the « ON » position, the 10 high LEDs of the PRO+ will solely function with the Lambda probe. Poor Normal Very good Press the right button: >> To enter the menu. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 14 To choose the letter/the number needed. To confirm and position on the following Press the left button : >> case. Press the left button after the 21st case : >> To exit. Copyright  2005 Alfano, S.A. All rights reserved.

  • Page 15: Display Mask

    NOTE: As soon as the PRO+ is in the START mode, all configured information OFF will be hidden. Menu 30 : C° / F° Configuring the temperature measuring unit: Press the right button: >> To enter the menu. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 16 Or the PRO+ takes its power from the battery of the vehicle with the A-431. In this case, you can select the mode: EXTERN. = The PRO+ never shuts off but is placed in hibernation mode after 30 minutes of non-use and is automatically activated when the engine restarts. Copyright  2005 Alfano, S.A. All rights reserved.
  • Page 17 This menu gives you the possibility of seeing the serial number and the version of the software of your PRO+. NOTE: Pressing the left button for 1 second at the start of any menu will make the system return to the STOP mode. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 18 ALFANO S.A. Rue de l’ Industrie, 3b – 1400 NIVELLES www.alfano.com Copyright  2005 Alfano, S.A. All rights reserved.