Download Print this page

Advertisement

Quick Links

TYRECONTROL « PT »
A-188
User Manual (EN)

Advertisement

loading
Need help?

Need help?

Do you have a question about the TYRECONTROL PT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alfano TYRECONTROL PT

  • Page 1 TYRECONTROL « PT » A-188 User Manual (EN)
  • Page 2 Keep therefore the Tyrecontrol distant (minimum 50cm) of the engine ignition to avoid false readings or a device ‘freezing’ when the engine is running. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 3 As soon as the Tyrecontrol detects a weak level of batteries, the word « BAT » appears in most menus while blinking. Working The TYRECONTROL has 8 main options represented by 8 icons : Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 4 In the position « VEHI », the Tyrecontrol displays : The hour and the date of the last « Set » of the Vehicle 3 The pressures of this « Set » Figure 2 Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 5 SETUP. In the example (figure 5), the device positions itself on the measure of the temperature in the center of the left rear tyre. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 6 In the position « VEHI », the Tyrecontrol displays : The hour and the date of the last « Set » of the Vehicle 1 The pressures of this « Set » Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 7 Figure 13 Press the button : the Tyrecontrol displays the second phase of data, that is to say the outside temperatures of the tires, before and after race + the gaps (figure 11). Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 8 With the help of the buttons , select the icon « ». Apply the mouthpiece of the Tyrecontrol on the valve of the tyre. The hour and the date are displayed in real time. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 9 With the button , select the vehicle wanted (figure 15) Press the central button during 1 second, to erase all data of vehicle 1 (figure 16) Figure 14 Figure 15 Figure 16 Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 10 , select the icon : Wait for 3 seconds. Note : when the Tyrecontrol is not in the menu « OFF », it dies out automatically after 10 minutes of non use. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 11 Procedure to leave the mode SETUP : After the menu « Calibration of the Temperature sensor », Press the central button on « EXIT », the Tyrecontrol starts in its normal working on mode « RECORD ». Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 12 Note : After having come out of the menu, only the « Vehi 1 » with its assigned number will be visible. Important : If the number of the vehicle 1 is adjusted on zero, when using the Tyrecontrol, the system won't permit to choose another vehicle. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 13 , to be able to modify the year, With the buttons , modify the year, Press the button , to come back behind, Press the central button , to come out of the menu. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 14 In one these two windows, press the central button to enter in the menu, « Ent » disappears. With the button , modify the unit, Press the central button to come out of the menu. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 15 In one of these two windows (depending on the menu « 05 »), press the central button to enter in the menu, « Ent » disappears. Note : the explanation below is based on the example of the car. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 16 After having programmed the points of captures as wanted, move on the “EXIT” icon, with the help of the 4 buttons. Press the central button to leave the menu. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 17 The two figures below represent the available capture places On the car (left side) and on the motorbike (right side) Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 18 It is useful to calibrate the sensor when the FACE indicates a value of pressure whereas no pressure has been entered in the Tyrecontrol (example : figure 21). The mouthpiece of the Tyrecontrol must be free. IMPORTANT : calibrate the Tyrecontrol with the mouthpiece FREE. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 19 - The two sensors of these devices must be placed at the same place. - Wait that the two displayed values stabilize. Press the central button to come out of the menu. Copyright  2005 Alfano, S.A. Tous droits réservés.
  • Page 20: Warranty Conditions

    No compensation will be paid for removal of enjoyment, and ALFANO cannot be held responsible for the direct or indirect consequences of their use or rendering useless.
  • Page 21 ALFANO S.A. Rue de l’Industrie, 3b – 1400 NIVELLES (BELGIUM) www.alfano.com 28-05-2010 Copyright  2005 Alfano, S.A. Tous droits réservés.

This manual is also suitable for:

A-188