Installing The Cx-Designer - Omron NS-CXDC1-V3 - REV 10-2010 User Manual

Installing the CX-Designer

2-2 Installing the CX-Designer
Note
1,2,3...
Install the CX-Designer in the hard disk.
To install the CX-Designer, execute the installation program provided.
For details on procedures for installing the CX-Designer from CX-One FA Inte-
grated Tool Package, refer to the CX-One Ver. 2.1 Setup Manual provided with
CX-One.
Cat. No. Model
W463 CXONE-AL@@C-
V4/AL@@D-V4
If the CX-Designer was previously installed from the CX-One and it's neces-
sary to install it from the individual CX-Designer installation disk, always unin-
stall the CX-Designer using the following procedure before installing it from its
individual installation disk. The CX-Designer will not operate properly if it is
installed without first uninstalling it.
1. Insert the CX-One installation disk into the CD/DVD-ROM drive.
2. Select the Modify Option to enable modifying the Support Software that is
installed.
3. In the Select Features Dialog Box, clear the selection of only the CX-De-
signer. Do not change any other selections.
4. Continue by following the instructions in the dialog boxes to modify the in-
stallation and uninstall CX-Designer.
5. Once the CX-Designer uninstallation process has been completed, place
the individual installation disk for the CX-Designer into the CD/DVD-ROM
drive and install the CX-Designer. (See note.)
Note If the version of the CX-Server bundled on the individual CX-De-
signer installation disk is lower than the version of the CX-Server
bundled with the CX-One, install only the CX-Designer and NOT
the CX-Server. If a version of CX-Server that is lower than the ver-
sion with the CX-One is installed, the CX-One will not operate prop-
erly.
The main buttons that are displayed during installation are as follows:
Confirms the settings in the window displayed and moves to the next
window.
Cancels the settings in the window displayed and returns to the previ-
ous window.
Closes the window currently being displayed. The settings in the win-
dow are cancelled.
Installation can be cancelled by pressing this button in the installation
window. A confirmation message will be displayed.
The actual folder configuration is displayed in a tree format, from
which the folders where installation files are to be installed can be
selected.
Manual name
CX-One Setup Installation and overview of CX-
Manual One FA Integrated Tool Package.
Section 2-2
Contents
13