Makita HR2611F Instruction Manual
Combination hammer
Hide thumbs
Also See for HR2611F:
- Instruction manual (88 pages) ,
- Technical information (23 pages) ,
- Instruction manual (13 pages)
Related Manuals for Makita HR2611F
Summary of Contents for Makita HR2611F
- Page 1 INSTRUCTION MANUAL Rotary Hammer / Combination Hammer HR2300 HR2310T HR2600 HR2601 HR2610 HR2610T HR2611F HR2611FT 010712 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
The following show the symbols used for the equipment. to EN60745: Be sure that you understand their meaning before use. Read instruction manual. Model HR2300, HR2601, HR2611F, HR2611FT Sound pressure level (L ) : 90 dB (A) DOUBLE INSULATION Sound power level (L... -
Page 3: Ec Declaration Of Conformity
) : 2.5 m/s or less For European countries only Uncertainty (K) : 1.5 m/s EC Declaration of Conformity Makita declares that the following Machine(s): Designation of Machine: Rotary Hammer Model No./ Type: HR2300, HR2310T, HR2600, HR2601 Conforms to the following European Directives:... -
Page 4: General Power Tool Safety Warnings
Designation of Machine: create sparks which may ignite the dust or fumes. Combination Hammer Keep children and bystanders away while Model No./ Type: HR2610, HR2610T, HR2611F, operating a power tool. Distractions can cause HR2611FT you to lose control. Conforms to the following European Directives:... -
Page 5: Rotary Hammer Safety Warnings
Personal safety 22. Maintain power tools. Check for misalignment Stay alert, watch what you are doing and use or binding of moving parts, breakage of parts common sense when operating a power tool. and any other condition that may affect the Do not use a power tool while you are tired or power tool’s operation. -
Page 6: Functional Description
To stop the tool from the locked position, pull the switch trigger fully, then release it. Lighting up the lamps For Models HR2611F, HR2611FT 1. Lamp 010721 CAUTION: Do not look in the light or see the source of light •... - Page 7 Attaching the quick change drill chuck Reversing switch action 1. Spindle 1. Reversing switch 2. Quick change lever drill chuck 3. Change cover line 4. Change cover 011562 010722 Check the line of the quick change drill chuck shows the CAUTION: symbol.
-
Page 8: Torque Limiter
For Models HR2310T, HR2610, HR2610T, HR2611F, Do not force the action mode change knob or do • HR2611FT not move it from symbol mode to symbol Rotation with hammering mode (or vise versa) at once. It may damage the tool. When turning the knob from symbol mode 1. -
Page 9: Depth Gauge
010715 the depth gauge Bit angle (when chipping, scaling or demolishing) For Models HR2310T, HR2610, HR2610T, HR2611F, 010717 HR2611FT At this time, the depth gauge needs to be inserted so that its toothed side is directed to the toothed side of hex hole 1. - Page 10 Installing or removing the dust cup 1. Lock button symbol 2. Grooves 3. Dust cup 010718 Adjust the depth gauge to the desired depth by moving it 011506 Before installing the dust cup, remove the bit from the back and forth while pressing the lock button. After the tool if installed on the tool.
-
Page 11: Operation
OPERATION 1. Inside periphery 2. Carved side Always use the side grip (auxiliary handle) and firmly hold the 3. Attachment tool by both side grip and switch handle during operations. 4. Cap Hammer drilling operation 5. Groove 012895 1. Cap 2. - Page 12 Use the quick change drill chuck as standard equipment. Chipping/Scaling/Demolition When installing it, refer to "changing the quick change For Models HR2310T, HR2610, HR2610T, HR2611F, chuck for SDS-plus " described on the previous page. HR2611FT 1. Sleeve 2. Ring 3. Quick change...
-
Page 13: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Core bit • Bull point •... - Page 16 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 884939C229...
Need help?
Do you have a question about the HR2611F and is the answer not in the manual?
Questions and answers