Table of Contents
Advertisement
■ Functions
SV Protection
This function protects (i.e., prohibits changing) the alarm setting,
operating method, and modes for the Temperature Monitoring Relay
that have been set on the rotary switches and DIP switch.
The protection function is activated by pressing the output latch reset
button on the Temperature Monitoring Relay for at least 5 s or by
turning ON the input to the external input terminal for at least 5 s.
The power indicator will flash when the protection is activated.
The protection function can be released by pressing the output latch
reset button on the Temperature Monitoring Relay for at least 5 s or
by turning ON the input to the external input terminal for at least 5 s.
The power indicator will light while the protection is being reset.
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ Temperature Monitoring Relay
K8AB-TH
6
Temperature Monitoring Relay
22.5
K8AB-TH
5
100
90
5
Mounting Hole Dimensions
Two, M4 screws or two, 4-dia screws
102
Note: Pull out and use the
hooks when mounting
using screws.
Advertisement
Table of Contents
