Contents IMPORTANT NOTICE..................3 Important safety information ................ 4 Notice....................... 7 Regular inspections before riding the bicycle ..........8 Names of parts ....................9...
A dealer's manual for professional and experienced bicycle mechanics is available on our website ( https://si.shimano.com For safety, be sure to read this user's manual thoroughly before use, follow it for correct use, and store it so that it can be referenced at any time.
Important safety information Important safety information...
Page 5
Important safety information Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may suddenly fall and be seriously injured. Check that the wheels are fastened securely before riding the bicycle. Using the axle release lever incorrectly may cause the wheel to fall off, etc.
Page 6
Important safety information For details on the E-THRU axle, refer to the E-THRU axle user's manual. The tires should be installed and removed by hand. If this is difficult, a resin tire lever for tubeless wheels may be used. In such cases, be sure to check that the rim surface has not been dented, scratched, or cracked as there is a risk of causing damage to the air seal between the tire and the rim, which would result in air leakage.
Do not use detergent or other chemicals when wiping the wheel, otherwise, the sticker on the rim may come off. Be sure to also read the manual for the disc brakes. Products are not guaranteed against natural wear and deterioration from normal use and aging. For maximum performance we highly recommend SHIMANO lubricants and maintenance products.
Regular inspections before riding the bicycle Regular inspections before riding the bicycle Before riding the bicycle, check the following items. If any problems are found, consult your place of purchase or a distributor. Are the spokes broken or loose? Is the rim surface dented, damaged, or cracked? Are the wheels secure? Are there any signs of brake oil leakage? Do the pads have a thickness of 0.5 mm or more?
Names of parts Names of parts Brake hose Brake hose Caliper Caliper Brake pad Disc brake rotor Disc brake rotor Spoke Valve hole E-THRU / through axle Freehub Rim surface Front hub Axle release lever...
Need help?
Do you have a question about the ULTEGRA WH-R8170-C36-TL-F and is the answer not in the manual?
Questions and answers