Aiphone KC-1SD Installation & Operation Manual

83057300 1099 (A) <> AIPHONE'
VIDEO SENTRY COLOR TILT
AUDIO SUB-MASTER STATION
Model: KC-1SD
INSTALLATION & OPERATION MANUAL
PACKAGE CONTENTS
¢« Audio sub-master station
1 SYSTEM OUTLINE & COMPONENTS
KC-1SD is an Audio-only sub-master station for use with VIDEO SENTRY COLOR TILT shinai N
audio video entry security intercom KC-1GRD.
e Packet of screws
Suereiar avoir Call extension e Installation & Operation Manual
Main monitor Sub monitor pincete ceeston tasak
Video door station station station ; Audio sub-master ;
i station
an
ol
e
Py
KC-DAR : GE]: PS-24E
JKC-1SD : : AC transformer (PT-1210N in USA)
or KC-1SD
Description Models Quantit
Video door station 1 pce
Main monitor station 1 pce
Sub monitor station Max. 2 pcs
Audio sub-master station | KC-1SD Used in lieu of KC-1HRD (max. 2 pcs)
Power supply 1 pce ~. Varies by system.
FEATURES o
Handset _~Door call-in LED e Audio only sub-master station capable of
í answering door, striking door & placing
Speaker for chime ——— ||| Poor release bution: all call for internal calling.
& all call (pre-tone/ = ~— ALL CALL button * Front chime volume control. Can be cut off.
voice) * Single-gang wall mounting.
Chime volume control
(TONE)
3 INSTALLATION
* Before actually mounting KC-1SD, the contents of 4. Power supply
Manuals of KC-1GRD must be thoroughly read and Single power supply PS-24E suffices for up to three monitor
understood. stations. But be sure to separately run 2-cond. wire from
1. Second room station PS-24E power supply to each main monitor station and sub
in KC-1GRD system, install one or two KC-1SD station(s) | Monitor station.
in place of sub-monitor station KC-1HRD.
KC-1GRD 3-station system
2. Mounting location
s des
|
+ (3 ———-+
KC-1SD is designed for wall-mounting only.
KC-DAR KC-tHRD KC-1SD
3. Cable
Use 2-conductor parallel cable for audio/video wires, which
is loop-wired and not homerun, plus another pair for power
supply in the same or separate jacketed cable.
|—» Separatel joc-
Cable specifications: (33) powered» j< pi ae
-0.65mmo ~1.0mme (22AWG ~ 18AWG). two 1-pair cables
$ P sal and PE(polyethylene) insulation is | PS-24E (2A).