Omron FQ - V1 User Manual page 131

I/O Signal Allocations
Signal
Output signals OUT1 (BUSY signal)
Input signals IN0
IN1
IN2
IN3
IN4
IN5
Note
The BUSY signal will be ON while the model is being re-registered.
Important
If the cycle time is too long, the PLC may not be able to detect when the BUSY signal is ON. If necessary, turn
OFF W0.00 after a suitable time elapses.
FQ User's Manual
Address
CIO 0.01
CIO 1.08
CIO 1.09
CIO 1.10
CIO 1.11
CIO 1.12
CIO 1.15
Controlling the Sensor from an External Device
129