Related Manuals for RAIS/attika Q-TEE
Summary of Contents for RAIS/attika Q-TEE
- Page 1 Q-TEE & Q-Tee C BRUGERVEJLEDNING BEDIENUNGSANLEITUNG USER MANUAL MANUEL D’UTILISATEUR BRUKERVEILEDNING BRUKSANVISNING KÄYTTÖOHJE GEBRUIKERHANDLEIDING...
-
Page 3: Table Of Contents
Specifications Dimensional sketches Information plate Installation Delivery packaging Disposal of packaging Installation distance, Q-Tee 57 Installation distance, Q-Tee C 57 Height adjustment Fitting/changing the handle Removing the combustion chamber lining External air connection, AirSystem Lubricating the hinges Attaching the legs... -
Page 4: Installation Manual
INSTALLATION MANUAL INSTALLATION MANUAL you shall install your RAIS/ATTIKA wood-burning Congratulations on the acquisition of your new stove, you should think about being able to heat RAIS or ATTIKA product! This installation manual other rooms in the home, so you get the most out will ensure that your wood-burning stove is of your new stove. -
Page 5: Technical Data
TECHNICAL DATA Technical data is given below, including specifications, dimensional drawings and the information plate. SPECIFICATIONS Danish Technological Institute ref.: 300-ELAB-1521-EN, 300-ELAB-1521-NS, 300-ELAB-1521-AEA DEFRA Q-TEE Q-TEE C Nominal output (kW) Min./Max. Output (kW): 2–6* 2–6* Heating area (m 30–90 30–90... -
Page 6: Dimensional Sketches
DIMENSIONAL SKETCHES 5 - GB... - Page 7 DIMENSIONAL SKETCHES GB - 6...
- Page 8 DIMENSIONAL SKETCHES 7 - GB...
- Page 9 DIMENSIONAL SKETCHES GB - 8...
- Page 10 DIMENSIONAL SKETCHES 9 - GB...
- Page 11 DIMENSIONAL SKETCHES GB - 10...
- Page 12 DIMENSIONAL SKETCHES 11 - GB...
- Page 13 DIMENSIONAL SKETCHES GB - 12...
- Page 14 DIMENSIONAL SKETCHES 330,5 13 - GB...
- Page 15 DIMENSIONAL SKETCHES GB - 14...
- Page 16 DIMENSIONAL SKETCHES 330,5 15 - GB...
- Page 17 DIMENSIONAL SKETCHES GB - 16...
- Page 18 DIMENSIONAL SKETCHES 330,5 17 - GB...
- Page 19 DIMENSIONAL SKETCHES GB - 18...
-
Page 20: Information Plate
Notified Body: 1235 Produced at: RAIS A/S, Industrivej 20, 9900 Frederikshavn, Danmark Q-Tee 57, Q-Tee C 57, Q-Tee 65, Q-Tee 85, Q-Tee C 85 Q-Tee 57 with legs, Q-Tee C 57 with legs AFSTAND TIL BRÆNDBART, BAGVÆG DK: 350mm SE BRUGERVEJLEDNING... -
Page 21: Installation
INSTALLATION INSTALLATION The following section explains how to install the wood-burning stove and includes information about the packaging, installation distances, etc. DELIVERY PACKAGING The wood-burning stove is supplied secured to a transport pallet using four transport safety fittings – one in each corner (A). The safety fittings are secured using screws and these must be removed. - Page 22 INSTALLATION DISTANCES Q-TEE 57 INSTALLATION DISTANCES: The applicable installation distances are shown below. The dimensions specified are in mm. Installation distances, flammable: uninsulated flue Right-angle installation Corner installation Installation distances, flammable: insulated flue Right-angle installation Corner installation 21 - GB...
- Page 23 INSTALLATION DISTANCES Installation distances, flammable Flammable ceiling GB - 22...
- Page 24 The applicable installation distances are shown below. The dimensions specified are in mm. e afstand til brændmur (50mm Skamotec 225) med U-isoleret røgrør. Q-Tee afstand til brændmur (50mm Skamotec 225) med U-isoleret røgrør. -2023 01-11-2023 Installation distances fire wall - uninsulated flue pipe...
- Page 25 INSTALLATION DISTANCES Q-TEE C 57 INSTALLATION DISTANCES: The applicable installation distances are shown below. The dimensions specified are in mm. Installation distances, flammable: uninsulated flue Right-angle installation Corner installation Installation distances, flammable: insulated flue Right-angle installation Corner installation GB - 24...
- Page 26 INSTALLATION DISTANCES Installation distances, flammable Flammable ceiling 25 - GB...
- Page 27 The applicable installation distances are shown below. The dimensions specified are in mm. C afstand til brændmur (50mm Skamotec 225) med isoleret røgrør. Q-Tee C afstand til brændmur (50mm Skamotec 225) med isoleret røgrør. 2023 01-11-2023 Installation distances fire wall - uninsulated flue pipe...
-
Page 28: Height Adjustment
HEIGHT ADJUSTMENT HEIGHT ADJUSTMENT The stove is equipped with four adjustment screws (1) under the stove. Use the adjustment screws to ensure the stove stands level. 27 - GB... -
Page 29: Fitting/Changing The Handle
B ( 0,30 : 1 ) A ( 0,30 : 1 ) A ( 0,30 : 1 ) FITTING/CHANGING THE HANDLE, Q-TEE C 57 B ( 0,30 : 1 ) The wood-burning stove comes with a temporary handle (1). To remove it, loosen the washers (2) and the screws (3). -
Page 30: Removing The Combustion Chamber Lining
REMOVING THE COMBUSTION CHAMBER LINING REMOVING THE COMBUSTION CHAMBER LINING Procedure for removing the combustion chamber lining: 1. Push upwards on the flue plate (1) until it moves freely. Afterwards, turn it down past the side combustion chamber lining. 2. Lift up the front combustion chamber lining (2) and remove. 3. -
Page 31: External Air Connection, Airsystem
EXTERNAL AIR CONNECTION, AIRSYSTEM EXTERNAL AIR CONNECTION, AIRSYSTEM All RAIS/ATTIKA wood-burning stoves can be supplied with external air. We call this external air supply AirSystem. The air intake to the system can be concealed by installing it in either the floor or the wall behind the stove. - Page 32 EXTERNAL AIR CONNECTION, AIRSYSTEM AIR CONNECTION THROUGH THE FLOOR Q-TEE C 57 1. Remove the reflector plate (1) by removing the 4 screws (2). 2. Tap out the knockout blank in the reflector plate using a hammer. 3. Remove the two screws in the damper and one in the bottom of the combustion chamber (3).
- Page 33 EXTERNAL AIR CONNECTION, AIRSYSTEM AIR CONNECTION THROUGH WALL Q-TEE 57 1. Remove the reflector plate (1) by removing the 4 screws (2). 2. Remove the two screws in the damper and one in the bottom of the combustion chamber (3).
- Page 34 EXTERNAL AIR CONNECTION, AIRSYSTEM AIR CONNECTION THROUGH WALL 1. Attach the air valve (3) to the wall with the gasket (2) between the wall and air valve. 2. Attach the flexible tube (4) to the connector on the back of the combustion chamber and air valve (3), and tighten using the hose clamps (1).
- Page 35 EXTERNAL AIR CONNECTION, AIRSYSTEM AIR CONNECTION THROUGH WALL Q-TEE C 57 1. Remove the reflector plate (1) by removing the 4 screws (2). 2. Remove the two screws in the damper and one in the bottom of the combustion chamber (3).
- Page 36 EXTERNAL AIR CONNECTION, AIRSYSTEM AIR CONNECTION THROUGH WALL 1. Attach the air valve (3) to the wall with the gasket (2) between the wall and air valve. 2. Attach the flexible tube (4) to the connector on the back of the combustion chamber and air valve (3), and tighten using the hose clamps (1).
-
Page 37: Lubricating The Hinges
LUBRICATING THE HINGES LUBRICATING THE HINGES, Q-TEE 57 / Q-TEE C 57 stove must lubricated regularly three moving parts closing mechanism hinges (see photo). heat-resistant oil. B ( 0,5 ) B ( 0,5 ) A ( 0,5 ) 0,5 ) -
Page 38: Attaching The Legs
ATTACHING THE LEGS ATTACHING LEGS TO Q-TEE 57 1. Remove the reflector plate (1) by removing the 4 screws (2). Remove the 4 adjustable feet (3). 2. Attach one leg (4) using the screws (2). Do not tighten the screws all the way in order to leave room for the reflector plate (1). - Page 39 ATTACHING THE LEGS ATTACHING LEGS TO Q-TEE C 57 1. Remove the 4 adjustable feet (1). 2. Attach the legs (2) using the 4 screws (3). 4. Now attach the 4 adjustable feet (1) to the legs. GB - 38...
-
Page 40: Q-Tee 57, Wall-Mounted
Q-TEE 57, WALL-MOUNTED MOUNTING Q-TEE 57 ON A WALL Knockout blanks The stove may only be mounted on a non-flammable wall without cracks. Contact a chimney sweep or building expert concerning the wall’s suitability. It is advisable to have authorised dealers suspend and install the stove. - Page 41 Lift the stove up onto the wall bracket and push it into place against the wall until it ‘clicks’ into place (3). Check that the top plate of the stove is horizontally level. If it is not, it may necessary to lift the stove down from the wall and adjust the bracket.
-
Page 42: Q-Tee C 57 Wall-Mounted
Q-TEE C 57 WALL-MOUNTED WALL MOUNTING The stove may only be hung on non-combustible walls without cracks. contact the chimney sweep or a construction expert regarding the suitability of the wall. It is recommended that suspension and assembly be carried out by authori- zed dealers. - Page 43 Distance from top plate to center of rear outlet 114 mm The wall bracket (1) is centered in relation to the wall socket in the wall or at the desired height above the floor. The holes are marked through the holes in the bracket. The bracket is fastened with suitable screws for the wall type.
-
Page 44: Accessories, Q-Tee 57
ACCESSORIES, Q-TEE 57 xx: optional colour code 1. Handle Black Oak - Glass Door 1. Handle Black Oak – Classic Door 8311033 8312033 2. Handle Stainless Steel – Glass Door 2. Handle Stainless Steel – Classic Door 8311036 8312036 3. Handle Brown Leather – Glass Door 3. -
Page 45: Accessories, Q-Tee C 57
ACCESSORIES, Q-TEE C 57 xx: optional colour code 1. Handle Black Oak 8321033 2. Handle Stainless Steel 8321036 3. Handle Brown Leather 8321047 4. Handle Black Leather 8321057 Ba1 set. (Automatic door closure) 832243090 Legs (100 mm) 8320501xx Airkit Floor... -
Page 46: Spare Parts List
SPARE PARTS LIST, Q-TEE 57 CLASSIC MODEL A spare parts overview is provided below. If spare parts other than those recommended by RAIS/ATTIKA are used, the warranty is rendered void. All replaceable parts can be purchased as spare parts from your RAIS/ATTIKA dealer. - Page 47 SPARE PARTS DRAWING GB - 46...
- Page 48 SPARE PARTS LIST, Q-TEE 57, GLASS MODEL A spare parts overview is provided below. If spare parts other than those recommended by RAIS/ATTIKA are used, the warranty is rendered void. All replaceable parts can be purchased as spare parts from your RAIS/ATTIKA dealer.
- Page 49 SPARE PARTS DRAWING GB - 48...
- Page 50 SPARE PARTS LIST, Q-TEE C 57, CLASSIC MODEL A spare parts overview is provided below. If spare parts other than those recommended by RAIS/ATTIKA are used, the warranty is rendered void. All replaceable parts can be purchased as spare parts from your RAIS/ATTIKA dealer.
- Page 51 SPARE PARTS DRAWING GB - 50...
- Page 52 SPARE PARTS LIST, Q-TEE C 57, GLASS MODEL A spare parts overview is provided below. If spare parts other than those recommended by RAIS/ATTIKA are used, the warranty is rendered void. All replaceable parts can be purchased as spare parts from your RAIS/ATTIKA dealer.
- Page 53 SPARE PARTS DRAWING GB - 52...
-
Page 54: Assessment Of Performance (Aop)
ASSESSMENT OF PERFORMANCE REPORT 22-09-2020 14:54:53 Dette PDF dokument er kun gyldigt, hvis det er digitalt signeret med OCES digitalsignaturen for Kim Sig Andersen, Teknologisk Institut. This PDF document is only valid if digitally signed with the OCES digital signature for Kim Sig Andersen, Danish Technological Institute. 53 - GB... - Page 55 2011 (the Construction products Regulation or CPR), this Assessment of Performance Report applies to the construction product Solid fuel room heater(s), Rais Q-Tee C series intended for domestic room heating placed on the market under the name or trademark of...
-
Page 56: Test Certificate
TEST CERTIFICATE TEST Reg.nr. 300 22-09-2020 14:56:30 Dette PDF dokument er kun gyldigt, hvis det er digitalt signeret med OCES digitalsignaturen for Kim Sig Andersen, Teknologisk Institut. This PDF document is only valid if digitally signed with the OCES digital signature for Kim Sig Andersen, Danish Technological Institute. 55 - GB... - Page 57 GB - 56...
-
Page 58: Installation Distance, Q-Tee
DECLARATION OF PERFORMANCE 57 - GB... - Page 59 DECLARATION OF PERFORMANCE GB - 58...
- Page 60 RAIS A/S ATTIKA FEUER AG Industrivej 20 Brunnmatt 16 DK-9900 Frederikshavn CH-6330 Cham Denmark Switzerland www.rais.com www.attika.ch...
Need help?
Do you have a question about the Q-TEE and is the answer not in the manual?
Questions and answers