Zebronics ZEB-MIGHTY 2.0 User Manual page 6

General Instructions
BT connectivity
Ÿ Switch the source to BT mode
Ÿ Turn on BT on your mobile and scan for
nearby BT devices.
Ÿ Tap on "ZEB-MIGHTY" to connect.
USB/mSD Mode
Ÿ Insert the USB/mSD card into the slot
provided on the speaker
Ÿ The speaker will automatically detect the
USB/mSD card and the supported audio
content will be played from it.
Note: This mode isn't selectable on the speaker or
remote control unless a USB/mSD flash card is connected
FM Radio
Ÿ Switch the speaker to FM mode
Ÿ Long press the Play/Pause button to scan
the available FM channels.
Ÿ Once the scanning is done, the first
scanned channel will start playing.
Ÿ The audio from the source can be heard
through the speaker.
AUX-In
Ÿ The speaker can be connected to another
speaker using a RCA to 3.5mm cable.
Ÿ Connect one end of the cable to a speaker
and the other end to another speaker.
Ÿ The audio can be heard through both the
speaker.