Introduction - LiteOn AP900Ci Manual

1

INTRODUCTION

CAN-bus is used in most modern vehicles because it offers a flexible and robust
communication in the vehicle system. The AP900Ci can be connected to practically any
vehicle because the product can be programmed with the correct CAN data for the vehicle
model in question. The AP900Ci is usually provided by your supplier with the
vehicle-specific data pre-programmed.
If you install AP900Ci and SL900Ci on a regularly base, it's also possible to program the
module yourself for the desired vehicle, you require a USB programming cable
(LTK-0900090). This makes it easier to stock product for multiple vehicles
programming application also offers the possibility to adjust the AP900Ci settings before and
during installation. Such as response time for engage (INIT), stabilizing speed (GAIN),
setting a speed limit and operating options. It's also possible to use the diagnostic function
with a laptop, you can check the input and output signals visually.
symbol action
2 x low
green
Module gives 2 low tones
The LED of the command module light up green
ON/OFF function command module
SET/+ function command module
RES/- function command module
CANCEL function command module
meaning
4
The
.