Activation Procedure - LiteOn AP900Ci Manual

7.1 ACTIVATION PROCEDURE

From a safety point of view, the Cruise Control functions are blocked from factory. The
software in the AP900Ci must be verified with the vehicle CAN-data. Run the activation
procedure to activate the Cruise Control functions.
turn the ignition off
and on and start the
engine immediately
start long tone
press and hold
the brake right away
start long tone
press and hold
the brake right away
If the procedure is not performed correctly, the Cruise Control will NOT function.
The activation procedure cannot be repeated when it is performed properly.
Check out the activation process on YouTube:
2x low
green
switch on the
Cruise Control
end long tone
release the brake
right away
end long tone
release the brake
right away
press and hold
till after the next
step
start long tone
1e
press and hold
the brake right away
4x high
high/low
(b) high/low tones,
repeat the procedure
11
4x low
press and release the
brake pedal 4x
end long tone
release the brake
right away
end of procedure