Advertisement
Easy Monitoring of PLC-based Process
Lower the cost of screens required for process monitoring and control.
The CX-Process Monitor Plus is Support Software that monitors a process control system based on OMRON
CS/CJ-series PLCs. Tag information, which is allocated in the monitor/control program in the Loop Controller,
can be allocated to dynamic elements in a Control Screen.
Flexible screens can be created inexpensively and easily to achieve Easy Monitoring of PLC-based process control.
The various functions of the Graphic and Trend Screens have been improved in the version 2.0 upgrade.
CX-Process Monitor Plus Functions
Monitor and control the operating status of function blocks
1
Function
in the Loop Controller.
Monitor the alarm status of function blocks
2
Function
in the Loop Controller.
3
Configure screens.
Function
Segment Program 2 Screen
Version 2.0 upgrade
Control Screen
Tuning Screen
Support Software (CX-Process Tool)
PID1
MV1
Tag
RSP1
allocation
PID2
MV2
Split
conversion
Heating and
cooling outputs
Create a monitor/control program.
2
Graphic Screen
Version 2.0 upgrade
Trend Screen
Version 2.0 upgrade
CX-Process
Monitor Plus
Ver. 2.0
CS/CJ-series PLC
Loop Controller
Control
Improvements to Trend and
Segment Functions
An upgraded Trend Screen called a Batch Trend Screen can start or stop data
collection using a data value as a trigger. Another screen can set or display
Segment Program 2. collection using a data value as a trigger. Another screen
can set or display a Segment Program 2 block.
Improvements to
Graphic Functions
Graphic elements, such as tanks and pumps, and
drawing functions can be used to easily and flexibly
create Graphic Screens. Fixed elements such as text,
lines, and ellipses have been added, along with
images, screen jumps, and faceplate pop-ups. Graphic
elements, images, and objects can be shown or hidden
based on data value. Graphic colors can be changed
based on tag values and graphics can be grouped.
Ver. 2.0
Ver. 2.0
3
Advertisement
