To contact SEBO in Canada: SEBO America, LLC SEBO Canada Telephone: (877) 258-5005 Telephone: (800) 334-6614 Fax: (303) 792-9196 Fax: (800) 270-4807 Website: www.sebo.us Website: www.sebocanada.ca For Warranty coverage information please refer to your Warranty Card included with your SEBO vacuum cleaner.
21. Maintenance and repairs must be done by qualified not working as it should, has been dropped, damaged, personnel. left outdoors, or dropped into water, take it to a SEBO 22. Use only original SEBO replacement parts. service center. 23. Do not use vacuum as a step.
Easy Brush Roller Removal – Quick brush cleaning or Changing Bags is Easy and Clean – SEBO filter bags can be replacement is easy, and no tools are required! changed in just a few seconds, and a hygiene cap keeps dust Thirty-foot Cord –...
IDENTIFICATION OF PARTS 1. Handle grip 2. Handle tube 3. Cable (cord) 4. Handle guide 5. Bag housing 6. Front cover 7. Cover release zipper 8. Power head 9. On/Off switch 10. Strain relief catch 11. Cable guide for mains cable 12.
Page 6
Step 3 (figure 3): Place the power head (8) on the floor. Place the bag housing (5) on the power head so that the connecting piece on the power head (32) fits into the corresponding opening in the bottom of the bag housing (31). Unzip the front cover of the bag housing completely.
When possible, consult the materials supplied by your floor’s manufacturer for information on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.
MAINTENANCE Always unplug vacuum from outlet before dismantling any part of the machine! Changing the Filter Bag - Figure 11 Removing the filter bag: Unzip the front cover of the bag housing (5). Lift the latch (38) slightly with your thumb and pull the green handle (39) on the filter bag up and out.
CLOG REMOVAL Always unplug vacuum from outlet before dismantling any clogs! Clogs in the Airflow Pathway - Figures 14 & 15 Most clogs can be removed by accessing the airflow pathway via the orange access door (44) located on the underside of the power head.
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Not plugged into good outlet. 1. Use another outlet. 2. Cable worn. 2. Replace cable. 3. Internal plug is unconnected or 3.
Need help?
Do you have a question about the SOFTCASE CE12 LIGHTWEIGHT and is the answer not in the manual?
Questions and answers