Maintenance Changing the Brush Strip Cleaning the Brush Strip Clog Removal Clogs in the Swivel Neck Trouble-Shooting Guide ET-C Power Head Schematic and Part Numbers Recommended SEBO duo Carpet Cleaning System Warranty How To Contact SEBO Brush motor Width Weight...
Avoid picking up sharp objects. 32. Always unplug vacuum before connecting or disconnecting either hose or power head. 33. Use this power head only in combination with a SEBO vacuum cleaner. 34. Do not connect power head to a malfunctioning or damaged vacuum.
SPECIAL SEBO PRODUCT FEATURES Your SEBO ET-C Power Head is designed specifically for use with the SEBO C3.1 and K3 canister vacuum cleaners. These vacuums are among the most technically advanced canister vacuum cleaners in the world. For example, the ET-C Power Head has warning systems and automatic shut-off capabilities that are designed to alert the user to machine problems that, if ignored, will damage the machine or diminish performance.
It will only move approximately 1/8-inch. Proceed to step 3. 3. Insert the base of the telescopic tube (E) into the power head swivel neck (3). Make sure that the connection tab (A) is prop- erly aligned with the connection plug (4) in the swivel neck.
When possible, consult the materials supplied by your flooring manufac- turer for information on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.
For more information on the display panel, see page 4. The Brush Information Display Panel - The control panel is located on the power head. Quick-reference panels tell you what the illuminated brush control lights mean. The brush control lights are in panel D.
Then, release the foot pedal (6), lower the swivel neck, check inside the swivel neck channel, and clean out pathway. For clogs not in the power head, please refer to your can- ister vacuum’s manual. Figure 5...
2. Remove clog. See page 8. 3. If carpet pile is too deep and loose, then use a “shag rake” attachment instead of the ET-C power head. 1. Replace brush strip. See page 8. 2. Brush is not fully in contact with the floor.
SEBO ET-C Power Head Pos. Part # Description 2002 DG Chassis 2007 DG Bumper 2009 Axle 2911 DG Foot pedal 2010 Axle spring 2614 DG Wheel 2014 Axle clamp 0102 Screw F 3.9 x 12 DIN 7981 6145 UL Swivel neck assembly...
Page 11
How it Works: The SEBO duo-P Cleaning Powder is made up of granules that are mois- tened with detergent and is environmentally friendly and safe to use. When the granules are worked into the carpet fiber, soil and stains are lifted out of the carpet by the duo-P powder.
Page 12
United States of America, please call SEBO America at (800) 334-6614. 5. To locate an authorized SEBO dealer or to register a warranty claim in Canada, please call Floor Care Equipment, Ltd. at (800) 661-8687.
Need help?
Do you have a question about the ET-C and is the answer not in the manual?
Questions and answers