Use L2Tp/Ipsec Vpn To Access Your Home Network - TP-Link BE230 User Manual

Chapter 15
15 3 Use L2TP/IPSec VPN to Access Your Home
Network
L2TP/IPSec VPN Server is used to create a L2TP/IPSec VPN connection for remote
devices to access your home network.
To use the VPN feature, you need to set up L2TP/IPSec VPN Server on your router, and
configure the L2TP/IPSec connection on remote devices. Please follow the steps below
to set up the L2TP/IPSec VPN connection.
*Image may differ from your actual product.
Home Network
Step 1 Set up L2TP/IPSec VPN Server on Your Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
Note:
• Firmware update may be required to support L2TP/IPSec VPN Server.
• Before you enable VPN
static IP address for router's WAN port and synchronize your
Router (VPN Server)
VPN Server > L2TP/IPSec, and enable L2TP/IPSec.
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
INTERNET
Remote Devices
System Time with internet.
VPN Server&Client
87