Page 1
4x51W MAX POWER AMH-525BT BLUETOOTH / USB / FM RECEIVER USER MANUAL PLEASE READ CAREFULLY BEFORE USING...
Page 2
Copyright Copyright “ “, “ “ are registered trademarks. All rights reserved. This document, entirely or in any part of it, is prohibited to reproduce, as well as copy without the preliminary written permission of the manufacturer. All trademarks, logos and names of products used on the packaging and in this document are logos or registered trademarks of the respective companies.
Precautions User manual contains important security recommendations and information about the proper operation of the device. Please carefully follow all the instructions given in this guide. 1. When installing the device, avoid places with high temperature, humidity, or places where there is a lot of dust. 2.
Package and installation Open the package and make sure that inside are: 1. USB receiver - 1 pc. 2. Remote control - 1 pc. 3. Keys for removing the receiver - 2 pcs. 4. ISO - connector - 1 pc. 5.
Power connection 1. Make sure your vehicle's onboard voltage is +12 volts. 2. Remove the fuse from the device before connecting the wires. 3. Connect the yellow (A4) wire to the +12 volt DC power supply. 4. Connect the red wire (A7) to the ACC terminal of the ignition switch. 5.
Sizes Remote Removing the battery protection (CR-2025). The remote control comes with battery protection. The remote control will not work until the protection is removed. Battery replacement: 1. When the lithium battery has lost capacity, replace it as shown in the figure. 2.
Page 9
Remote control Turning on / off the device 2. Volume adjustment 3. Switching radio ranges Reception of a call Previous track / rewinding back / Radio setting up 5. Choosing a source Next track / rewinding forward / Radio setting up 7.
Main operations Turning on / off Press any button to enable the device. Press and hold the button (1) / SRC to turn off. Volume adjustment Rotate the volume control handle (3) to set the desired level. Choosing a source Press the button (1) / SRC to switch between sources Reproduction: Radio ->...
Vol limit Select the value of the maximum possible volume level. Power UP Selects the volume level value when turning on the receiver. DISPLAY - display settings Color set - RGB color setting. Variable - automatic change of backlight colors. RED (red), PINK (pink), PURPLE (purple), BLUE (blue) Customize - setting a custom highlight color.
System Car ACC - ignition lock type Yes - set for a car with ACC position, the red wire of the device power supply is connected to the ACC position of the ignition switch. No - set for the machine without ACC position, the red power wire is connected to constant +12 volts (together with the yellow one).
Connect the USB storage device to the connector on the front panel of the device. Mp3, FLAC files will start playing automatically. The USB connector supports charging mobile devices. Charging current - 1A. IMPORTANT! There are many free and other software for encoding FLAC, Mp3 and WAV files on the market, and depending on the encoding status and file format, you may experience poor playback quality or noise during playback.
Pair your phone with the AMH-525BT receiver: 1. Turn on Bluetooth on your mobile device. 2. Find “AMH-525BT” in the list of available BT devices and connect to it. Authorization PIN: 1234 . 3. In case of successful connection, the “BT” indicator on the receiver’s display will stop blinking and will light up constantly.
Smartphone app Most device settings are available in the AurA Audio mobile app for Android or iOS. You can control the AMH-525BT receiver from your smartphone: 1. Install the AurA app from Google Play or the App Store.
Page 16
Steering wheel button programming To properly connect the original resistive remote control, consult your car dealer or an authorized installation center. Button programming procedure: 1. Select the SYSTEM menu. 2. Enter the SWC section and select one of the two memory banks (SWC 1 or SWC 2).
WARRANTY CARD Model name Serial No. Buyer name Buyer address Phone No. Sales date Signature Seller name/stamp...
Page 19
TERMS OF WARRANTY SERVICE The manufacturer guarantees the high quality and reliability of the products provided that the technical requirements described in Operating Instructions. This warranty is issued for a period of one year from the date of purchase and is provided in the event that the product is found to be defective due to inadequate quality of materials or workmanship of the manufacturer.
Need help?
Do you have a question about the AMH-525BT and is the answer not in the manual?
Questions and answers