Page 2
Playback control from USB device and micro SD memory card. Àâòîðñêèå ïðàâà Insert a micro SD card into the slot on the device or connect USB device to the USB port. The playback is a registered trademark. mode will automatically switch to the connected USB device or inserted Micro SD card. All rights reserved.
Page 3
Basic operation Packaging content Adjusting sound parameters The set of the device includes the following accessories intended for its installation/removal in a car. Press SEL on the front panel to select sound adjustment options. The parameters are selected in the following order: Volume - BASS (low frequencies) - TREBLE (high frequencies) - BAL (left/right balance) - FAD (front/rear balance).
Page 4
7. Connect the rest of the wires as shown in Figure 3. AMH-320BT MicroSD Note: each time the yellow wire is disconnected from the 12 volts power circuit, the device will revert to factory settings. LOUD Models: AMH-320BT, AMH-330BT, AMH-350BT ISO connector Power and speaker connections YELLOW ACC +12V DC +12V BLUE предохранитель...
Need help?
Do you have a question about the AMH-320BT and is the answer not in the manual?
Questions and answers