EarthCore ISOFLAMES BVETTO BVB24SB Installation, Operation, Maintenance And Owner's Manual

Advertisement

Quick Links

IMPORTANT:
This manual contains assembly rules, installation steps and guidelines, and use and
maintenance instructions for ISOFLAMES BVETTO BURNER in the BVETTO gas fireplace. This manual must
become the property of and be reviewed by all current and future users of this product. It is the responsibility
of the distributor, general contractor, and the installer of this product that the instructions in this manual are
followed exactly and, further that the allowed gas log appliance used in this product be installed in strict
accordance with the gas log manufacturer's listing and explicit installation and operation instructions.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Leave the building immediately.
Do not touch any electrical switch; do not use any
phone in your building.
Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire
department.
INSTALLER: Leave this manual with the appliance
CONSUMER: Retain this manual for future reference
The ISOFLAMES BVETTO Burner shall only be installed in the
BVETTO Gas Fireplace.
PFS Report No. 09-79 SAP No. 506022-03
USA: ANSI Z21.50 - 2019
Canadian: CSA 2.22- 2019
Issued: MAY 2024
Revision: 008
©2024 Earthcore Industries, LLC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ISOFLAMES BVETTO BVB24SB and is the answer not in the manual?

Questions and answers

Summary of Contents for EarthCore ISOFLAMES BVETTO BVB24SB

  • Page 1 PFS Report No. 09-79 SAP No. 506022-03 phone. Follow the gas supplier’s instructions. USA: ANSI Z21.50 - 2019 • Canadian: CSA 2.22- 2019 If you cannot reach your gas supplier, call the fire department. Issued: MAY 2024 Revision: 008 ©2024 Earthcore Industries, LLC...
  • Page 2: Table Of Contents

    ISOFLAMES BVETTO BURNER MAY 2024 Table of Contents ANSI Z21.50 Listing Label ..............................3 Bvetto Burner Specifications ..............................3 Safety Instructions ................................3-5 Component List ..................................6 Gas Line and Valve Box Installation ............................7 Valve Box and Burner Wiring ............................... 8 Bvetto Lintel Switch Wires and Burner Module Connection ....................
  • Page 3: Ansi Z21.50 Listing Label

    These include pregnant women, people with heart or lung diseases or anemia, people at high altitude or under the influence of alcohol. Earthcore Industries strongly recommends the use of a carbon monoxide detector/alarm device wherever gas fired appliances are in use.
  • Page 4 ISOFLAMES BVETTO BURNER MAY 2024 SAFETY INSTRUCTIONS WARNING!!! This product contains or generates chemicals known to the state of California to cause cancer or birth defects or other reproductive harm. WARNING!!! This appliance assembly contains burner orifices specifically for the input gas specified on the burner and box, as well as the BTU rating specified in this manual.
  • Page 5 MAY 2024 ISOFLAMES BVETTO BURNER SAFETY INSTRUCTIONS 17. It is imperative that the unit’s control areas, burners and circulation air passages be kept clean. 18. Keep all combustible material, gasoline, and other flammable liquids at a safe distance from the fireplace. Do not use the appliance where these items are used or stored.
  • Page 6: Component List

    ISOFLAMES BVETTO BURNER MAY 2024 COMPONENT LIST Item No. Description Part No. Main Burner Assembly (natural gas) BVB24SB-SN, BVB36SB-SN Main Burner Assembly (propane) BVB24SB-SP, BVB36SB-SP Pilot Assembly (natural gas) ISF-E-PAN Pilot Assembly (propane) ISF-E-PAP Gas Valve (natural gas) ISF-E-GVN Gas Valve (propane) ISF-E-GVP Control module/remote receiver ISF-E-ICM...
  • Page 7: Gas Line And Valve Box Installation

    MAY 2024 ISOFLAMES BVETTO BURNER GAS LINE & VALVE BOX INSTALLATION The valve control box comes with a 110” pilot assembly lead; therefore, the box must be mounted within 7’ of the fire- place. (Figure 1) Attach the metal enclosure to the studs using standard building materials. The metal enclosure must be mounted in a loca- tion that can be accessed in the future for additional connections &...
  • Page 8: Valve Box And Burner Wiring

    ISOFLAMES BVETTO BURNER MAY 2024 VALVE BOX & BURNER WIRING DIAGRAM FIGURE 1 TABLE 1 INLET PRESSURE MANIFOLD PRESSURE FUEL TYPE HIGH DESIRED MINIMUM MAXIMUM FLAME FLAME NATURAL 7” WC 5” WC 10.5” WC 3.5” WC 1.6” WC LP GAS 11”...
  • Page 9: Bvetto Lintel Switch Wires And Burner Module Connection

    MAY 2024 ISOFLAMES BVETTO BURNER BVETTO SWITCH WIRES AND MODULE CONNECTION DIAGRAM FIGURE 3 *High Temp Lintel will come with approximately 7ft extension wires. The extension wires will connect both Lintel/Damper switch wires to X4 of control module. FIGURE 4...
  • Page 10: Burner Installation

    ISOFLAMES BVETTO BURNER MAY 2024 BURNER INSTALLATION IMPORTANT: Prior to installation: Shut off main gas supply to fireplace. The ISOFLAMES BVETTO Burner shall be installed by qualified professional service technician. To ensure proper performance of the appliance the owner’s installation manual must be followed carefully. Position the burner in the center of BVETTO fireplace floor towards the rear.
  • Page 11: Remote Control System

    MAY 2024 ISOFLAMES BVETTO BURNER REMOTE CONTROL SYSTEM SYNCHRONIZE REMOTE TO CONTROL MODULE FOR THE FIRST TIME TURN ON THE APPLIANCE FIGURE 9 REMOTE FLAME CONTROL FIGURE 10...
  • Page 12 ISOFLAMES BVETTO BURNER MAY 2024 REMOTE CONTROL SYSTEM TEMPERATURE INDICATOR DISPLAY FIGURE 11 TURN OFF THE APPLIANCE FLAME COLOR AND BEHAVIOR FIGURE 12 Continuous Pilot (CPI) & Intermittent Pilot (IPI) selection FIGURE 13...
  • Page 13: Burner Lighting Instructions

    ISOFLAMES BVETTO BURNER MAY 2024 BURNER LIGHTING INSTRUCTIONS It is required that the set of safety instruction labels that have been supplied with the appliance be affixed to the operation and control points of the appliance. It is the installers responsibility to ensure these warnings are properly affixed during installation.
  • Page 14: Burner Media And Log Installation

    MAY 2024 ISOFLAMES BVETTO BURNER BURNER MEDIA AND LOG INSTALLATION Spread lava rock on the hearth floor of the fireplace around the front and sides of burner. DO NOT put lava rock directly on the burner OR behind it. Place embers along the pan section of the burner and spread evenly. Figure 15 It may be necessary to break large clumps into smaller pieces For LP models, vermiculite media must be used prior to using embers.
  • Page 15 ISOFLAMES BVETTO BURNER MAY 2024 BURNER MEDIA AND LOG INSTALLATION 24” Weathered Oak Logs ① ② ③ ④ 36” Weathered Oak Logs ① ② ③ ④...
  • Page 16 ISOFLAMES BVETTO BURNER MAY 2024 BURNER MEDIA AND LOG INSTALLATION 24” Birch Logs ① ② ③...
  • Page 17 ISOFLAMES BVETTO BURNER MAY 2024 36” Birch Logs ① ② ③ ④...
  • Page 18: Troubleshooting

    MAY 2024 ISOFLAMES BVETTO BURNER TROUBLESHOOTING Earthcore Industries Technical Support: 1-800-642-2920 Issue Probable Cause Possible Solution Verify power is ON No power Check wiring on ignition module and gas valve are correct No spark on pilot Verify ignitor not contacting pilot gas...
  • Page 19: Registration Card

    MAY 2024 ISOFLAMES BVETTO BURNER REGISTRATION CARD Please tear out along line and send to: Earthcore Industries Attn: Technical Department 6899 Phillips Industrial Blvd Jacksonville, FL 32256 Dealer Date of Purchase: Date Of Installation: Address: City, State, Zip: Phone No.:...
  • Page 20: Warranty

    (3) address of installation; (4) name, address and phone number of the owner; and (5) a brief description of the defect. Earthcore, or any division thereof, is not responsible for any labor costs or indirect costs incurred for the replacement of defective components.

This manual is also suitable for:

Isoflames bvetto bvb36sb

Table of Contents