Page 1
CONTACT INFO 122 GAYOSO AVE MEMPHIS, TN USA 38101 TECH SUPPORT 800-903-6979 SHOW US YOUR INSTALL PRX1500.1V2 WWW.MEMPHISCARAUDIO.USA PRX1000.1V2 @MEMPHISCARAUDIO PRX800.1V2 PRX400.1V2 @MEMPHISCARAUDIOUSA PRX800.5V2 PRX500.4V2...
Specifications Memphis Audio built a 50 year legacy in the audio industry engineering the highest quality products to produce Specifications PRX800.5V2 PRX500.4V2 PRX400.1V2 the best possible listening experience for our fans and loyal supporters. To fully appreciate our products we RMS Power/CH @ 4Ω...
Installation Information Power Supply Connections Memphis Audio recommends the installation of our products to be performed by an Authorized dealer. Attempting Install the fuse at the battery last! an installation project on your own or through an unauthorized source may result in damage to your products and...
The Lowpass crossover/filter is designed to remove high frequency information from a speaker. This is generally used to prevent mid bass speakers or subwoofers from trying to reproduce mid and high frequency information that PRX1500.1V2 they are not designed to reproduce. The crossover frequency is adjustable from 50Hz to 250Hz and uses a 18dB per octave slope.
Page 6
Memphis Audio will not be responsible for damages incurred in shipment or due to improper packaging materials used by the purchaser. WIRING MONO AMPLIFIERS - PRX1500.1V2//PRX1000.1V2//PRX800.1V2//PRX400.1V2 If determined to be within warranty your product will be repaired or replaced at the discretion of Memphis Audio. MINIMUMI 1Ω WIRING SUBWOOFERS When using a single amplifier to power one subwoofer, the positive and negative terminal of the subwoofers voice coil is...
Need help?
Do you have a question about the PRX1500.1V2 and is the answer not in the manual?
Questions and answers