Table of Contents
Advertisement
Stop Play
1. Press STOP/
on the remote control or
the unit. The display will show the total
number of tracks and total playing time.
2. Press the EJECT button, to remove the
CD from the compartment.
Programmed Playback
Up to 20 tracks can be programmed for
playback.
Using the remote control (at CD STOP mode):
1. Press the MEMO button. MEMORY
will show on the display, the track
number is shown on the left and the
program number on the right, as below.
MEMORY
CD
- -
P-01
2. Use the
buttons to select the desired
track number to be programmed first.
3. Press the MEMO button. The display will
increment the program number.
4. Use the
buttons to select the track
number to be programmed second in the
programmed sequence.
5. Press the MEMO button.
6. Repeat this process until you have
entered all of the tracks you wish to play
back in the programmed sequence..
7. Press PLAY/PAUSE to start playback.
Play back will start with first track selected.
8. To stop playback press STOP/
9. Opening the CD door will clear the program.
Random Play
1. With the CD loaded, press RDM on the
remote control. The tracks will be played in a
random order.
2. To cancel random play, either press RDM or
STOP on the remote control, or STOP on
the unit.
Repeat
Play
PLAY MODE)
1. Press the REPEAT on the remote control,
to repeat playback of the same track. The
REPEAT indicator will show on the display.
2. To
repeat
all
tracks,
REPEAT
twice.
indicator will show on the display.
3. To cancel, press M-UP/REPEAT on the
unit
until
the
extinguishes.
4. Repeat function will only work on CD
playback.
10
REP.M-UP(AT
press
M-UP/
The
REPEAT
ALL
REPEAT
indicator
Advertisement
Table of Contents
