MODEL NO.: RCD725 INSTRUCTION MANUAL SENSOR COMPACT MUTE DIGITAL AUDIO STANDBY/ON BAND W-SURROUND OPEN/CLOSE TAPE TUNER PROGRAM MEMORY VOLUME REPEAT STOP MEMORY UP Compact Component System AUTO STOP PUSH OPEN Before operating this unit, please read this Owners manual carefully.
TABLE OF CONTENTS TABLE OF CONTENTS This instruction manual is important to you. Please read it. In a short time it shows exactly how to connect, operate and adjust this unit for best performance. It can save you money. It shows simple things to do and check before you call for help and save the cost of unnecessary service and call out charge.
TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The lightning flash with arrow- head symbol, within an equi- lateral triangle is intented to...
CD Button Standby/On Button Tuner Button Tape Button Stop Button Memory/Clock Button Play/Pause Button Track/Tune Forward Button 9 M-Up/Repeat Button INSTALLATION BATTERY The remote control use 1 power source, CELL BATTERY (CR 2025, 3V). Simply pull out the insulation tag in the battery compartment. The remote control is now functional.
Page 8
PREPARATION FOR USE Remove the unit carefully from the box, retaining the packaging for future use. Read these instructions carefully before use. CONNECTIONS Connect the speakers to the speaker sockets on the back of the unit. Connect the right speaker to the right socket and the left speaker to the left socket. Extend the FM antenna.
Page 9
Minutes will start flashing. Adjust by pressing the Frequency Up or Down Buttons (8,15). Press the PROG/CLOCK adjust button on the remote control (4) to store the time. LISTENING TO THE RADIO OPERATION Press the STANDBY/ON button to turn the unit on. Select the Tuner function by pressing the TUNER/BAND button.
Page 10
HANDLING COMPACT DISCS To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles.
Page 11
Insert a CD as described in the previous section and close the disc compartment. The display will then show the total number of tracks and total playtime. Press the PLAY/PAUSE button. Disc play will begin from the start of the first track of the disc. A particular track can be selected using either of the CD SKIP buttons.
Page 12
TO SKIP BACK TO THE PREVIOUS TRACK ON A DISC For example to skip back to the beginning of track 3 while track 4 is playing. Press the SKIP REW TRACK button twice. Disc play will resume at the beginning of track 3. The CD player will skip back one track each time the Reverse Skip Track button is pressed.
Page 13
This continues until all the tracks have been played on that disk, the unit will then enter the STOP mode. It is possible to program, the tracks you wish to play in a sequence of your choice, it is not possible to enter programs during disc play. Press the STOP Button first, and then follow the instructions below.
Page 14
MUTE Press the MUTE button on the remote control to switch off the sound The MUTE indicator lights up. Press MUTE again to restore the sound to the previous level. Mute indicator will go off. COLOUR/ MODE Press STANDBY/ON button, seven colour( green white yellow cyan red purple blue) will cycle slowly on the display.
Page 15
PREPARATION L I S T E N I N G T O T H E T A P E INSERTION AND REMOVAL OF CASSETTES Firstly you must press the PUSH OPEN button to open the cassette key door. When you hear a cluck, the door will be open automatically.
Page 16
RECORDING FROM CD Press the STANDBY/ON button to turn the unit on. Select the CD function by pressing the CD button and insert a disc. Press the RECORD button and the PLAY button at the same time. Press the PLAY/PAUSE button. To stop recording, press the STOP button of the CD player.
This removes particles of the metal . HEAD CLEANING oxide coating that wear off the tape and accumulate on these parts and impair performance. Switch off the power, press the Stop/Eject button to open the cassette door, and press the Play button.