Cd Operation - Curtis RCD856 Instruction Manual

TO LISTEN TO THE RADIO
Press the POWER button to turn the unit on.
Slide the FUNCTION selector switch to the TUNER position.
Slide the BAND switch to the AM, FM or FM STEREO position.
AM- Select this to listen to AM broadcasts.
FM- Select this to listen to FM broadcasts in mono. Noise present in stereo broadcasts
can be reduced by listening in mono.
FM STEREO- Select this to listen to FM STEREO broadcasts. The FM STEREO indicator will light
when the radio is tuned to a stereo FM station.
Tune a desired station by rotating the TUNING control.
Adjust the VOLUME control and BASS BOOST button as desired.

CD OPERATION

The CD changer in this system can play up to 3 CDs in succession to provide you with over three
hours of uninterrupted music. When the first CD ends the second CD begins automatically. When
all 3 CDs have finished the changer stops.
In addition to normal playback of up to 3 CDs you may program up to a total of 32 tracks on the 3
discs to playback in any specific order you choose. You may also use the REPEAT function to
repeat a single track, repeat all tracks on a single disc, or repeat all tracks on all the discs in the
changer.
The LCD display provides all the information about the operation of the CD changer. Please refer to
the following diagram.
A) ALL DISC------------------This indicates that the changer is in the normal operation mode and
B) PROGRAM---------------- This indicates that the changer is in the programmed playback mode
C) REPEAT INDICATORS--Show which of the 3 repeat modes has been selected. Refer to the
D) DISC INDICATORS-----These indicators show the number of discs which are loaded in the
E) TRACK NUMBER-------- Shows the total number of tracks on the disc when the disc is stopped
F) TIME DISPLAY----------- Shows the total playing time of the disc when the disc is stoped and
CD OPERATION
that it will play all tracks on all the discs in the tray in numerical order.
and will play selected tracks on selected discs in the order in which they
were programmed.
instructions for repeat playback.
changer. The indicator blinks to show which disc is playing or in the
play position. If the changer checks all 3 disc pockets and finds no
discs the display will indicate NO DISC.
and shows the track number being played during playback.
shows the elapsed time in minutes and seconds of the track which is