Klipsch T10 BESPOKE Quick Start Manual

Quick Start Guide
1) Proper Power On:
• Press and hold the round button firmly on your T10 Charger for at least one full second. Wait until you see
charger lights number 2 and 4 illuminate simultaneously to indicate both left and right ear computers have boot-
ed and communicated with one another. (there are 5 lights. so 2 and 4 are next to the far right, and far left)
• Open the gull wing doors, remove the ear computers. If previously paired to your source device (phone or tab-
let), they will automatically pair again. If not paired already, you'll need to follow pairing procedure (below).
• ALWAYS follow the proper power on procedure, even in the future after your devices have been connected to
the phone. The power on procedure ensures that both ear computers speak to each other, establish a stereo con-
nection, and negotiate roles PRIOR to establishing the connection to your source device.
2) Pairing Procedure:
• Place your entire finger over the Klipsch Logo (on either the left or the right ear-computer after powering them
on via correct boot sequence above). Hold your finger over entire surface for at least (6) seconds, then release.
Note the lights on each ear computer will alternate red/white/red/white indicating they are advertising for a
bluetooth connection with source device.
• Open bluetooth settings on your source device and look for T10 on the list, select it. The lights on each ear
computer will flash (3) times indicating that you have successfully paired via bluetooth classic. (used for playing
content, and for phone calls).
• To pair to a different source device, simply place the ear computers in pairing mode at any time with the six
second hold procedure. Note: if paired to more than one device at a time, it's best to leave bluetooth 'off ' on
whichever source device you are 'not' using. Otherwise, your ear computers will naturally pair to the 'stronger'
of the two (or more) available devices in proximity.
3) Download and Connect the App:
• Visit Apple App Store, or Google Play Store. Search for "T10 Bespoke", and download the app.
• Open the App on your source device. The app will ask you to connect to your T10 Bespoke. Touch the word
CONNECT written in orange typeface. Wait a few moments. Then the home-screen of the app will open. In-
structions for all advanced functions are conveniently presented within the app.
• Your T10 App connects over BLE (bluetooth low energy) and provides important command/control over the
ear-computers. Vice-versa, the ear computers communicate voice-control functionality and other key functions
which require the App to be open and running in the background on your phone.
• Remember to assure you have the T10 App running whenever you're using your ear computers so that all func-
tions to work as designed. If you are pairing to a smart watch for use during exercise, advanced functions (like
voice) will not be available.