ELEQ 5L4311 Installation Manual

Technical Specification Technical Specification Technical Specification
Safety and environmental conditions Safety and environmental conditions Safety and environmental conditions
CE marking CE marking CE marking LV directive 2014/35/EU LV directive 2014/35/EU LV directive 2014/35/EU
RoHS directive 2015/863/EU RoHS directive 2015/863/EU RoHS directive 2015/863/EU
WEEE directive 2012/19/EU WEEE directive 2012/19/EU WEEE directive 2012/19/EU
EN-IEC 61439-2:2011 EN-IEC 61439-2:2011 EN-IEC 61439-2:2011
Standard Standard Standard
EN-IEC 60269-3:2013 EN-IEC 60269-3:2013 EN-IEC 60269-3:2013
This product is designed to be safe under the following This product is designed to be safe under the following This product is designed to be safe under the following
conditions: conditions: conditions:
Specification Specification Specification
Environmental conditions Environmental conditions Environmental conditions
Operating temperature: Operating temperature: Operating temperature: -5°C - +55°C -5°C - +55°C -5°C - +55°C
Relative humidity: Relative humidity: Relative humidity: 5% - 85%, non condensing 5% - 85%, non condensing 5% - 85%, non condensing
Protection degree: Protection degree: Protection degree: IP23 IP23 IP23
Installation class: Installation class: Installation class: 2 (double insulation) 2 (double insulation) 2 (double insulation)
Pollution degree: Pollution degree: Pollution degree: 2 2 2
Application conditions Application conditions Application conditions
400V 400V 400V
Umax: Umax: Umax:
50Hz 50Hz 50Hz
Frequency: Frequency: Frequency:
63A (mantle terminals) 63A (mantle terminals) 63A (mantle terminals)
Imax: Imax: Imax:
1x D01 (E14), max 6A 1x D01 (E14), max 6A 1x D01 (E14), max 6A
Fuse: Fuse: Fuse:
Yes, maximum 3 ground cables 18 Yes, maximum 3 ground cables 18 Yes, maximum 3 ground cables 18
Strain relief: Strain relief: Strain relief:
±0,5mm or 12,5 ±0,5mm and 1 ±0,5mm or 12,5 ±0,5mm and 1 ±0,5mm or 12,5 ±0,5mm and 1
light poles cord 8 ±0,5mm light poles cord 8 ±0,5mm light poles cord 8 ±0,5mm
Maximum wire cross section Maximum wire cross section Maximum wire cross section
Terminal N, 1, 2, 3: 2x 16mm Terminal N, 1, 2, 3: 2x 16mm Terminal N, 1, 2, 3: 2x 16mm
and torque: and torque: and torque:
4Nm 4Nm 4Nm
Terminal 4, 5: 2,5mm Terminal 4, 5: 2,5mm Terminal 4, 5: 2,5mm
Terminal 6,7: 1,5 mm Terminal 6,7: 1,5 mm Terminal 6,7: 1,5 mm
Diameter ø Diameter ø Diameter ø
84mm 84mm 84mm
Height Height Height
279,5mm 279,5mm 279,5mm
Storage Storage Storage
Temperature: Temperature: Temperature: -20°C - +70°C -20°C - +70°C -20°C - +70°C
Relative humidity: 5% - 85%, non condensing
Relative humidity: Relative humidity: 5% - 85%, non condensing 5% - 85%, non condensing
Approval Approval Approval - - -
Specification per type Specification per type Specification per type
5L4311.. 5L4311..
Yes, 6A Yes, 6A
Fuse included Fuse included Fuse included
Yes
Phase selectable Phase selectable Phase selectable
Covered mantle Covered mantle Covered mantle Yes
terminals terminals terminals
597gr 597gr
Weight Weight Weight
Citel MLPC 1-230L-R* Citel MLPC 1-230L-R* Citel MLPC 1-230L-R*
Surge Protection Surge Protection Surge Protection
Protection level 10kA/10kV Protection level 10kA/10kV Protection level 10kA/10kV
Device (SPD) Device (SPD) Device (SPD)
Spring terminal connection for max 1,5 mm Spring terminal connection for max 1,5 mm Spring terminal connection for max 1,5 mm
*Please consult *Please consult *Please consult www.citel.fr www.citel.fr www.citel.fr for more information about the MLPC1-230L-R for more information about the MLPC1-230L-R for more information about the MLPC1-230L-R
Please be aware, product liability, fulfilment to requirements and Please be aware, product liability, fulfilment to requirements and Please be aware, product liability, fulfilment to requirements and
warranty are all expired when modifications on the product are made. warranty are all expired when modifications on the product are made. warranty are all expired when modifications on the product are made.
ELEQ reserves the right to carry out modifications on its products, in ELEQ reserves the right to carry out modifications on its products, in ELEQ reserves the right to carry out modifications on its products, in
order to improve them, without prior notice. order to improve them, without prior notice. order to improve them, without prior notice.
Safety instruction Safety instruction Safety instruction
All activities for installation, commissioning and maintenance of All activities for installation, commissioning and maintenance of All activities for installation, commissioning and maintenance of
this connection box must be performed by qualified personnel this connection box must be performed by qualified personnel this connection box must be performed by qualified personnel
that has the knowledge of applicable safety precautions. This that has the knowledge of applicable safety precautions. This that has the knowledge of applicable safety precautions. This
guide assumes that the reader of this document has sufficient guide assumes that the reader of this document has sufficient guide assumes that the reader of this document has sufficient
electro-technical knowledge to understand the content of this electro-technical knowledge to understand the content of this electro-technical knowledge to understand the content of this
document. document. document.
General General General
The LS-84 is a connection box for public lighting and intended The LS-84 is a connection box for public lighting and intended The LS-84 is a connection box for public lighting and intended
to be used in lighting poles. The connection box shall be to be used in lighting poles. The connection box shall be to be used in lighting poles. The connection box shall be
mounted in a weather protected and dry location. In the mounted in a weather protected and dry location. In the mounted in a weather protected and dry location. In the
connection box the incoming (ground) cable can be connected. connection box the incoming (ground) cable can be connected. connection box the incoming (ground) cable can be connected.
If desired, looped circuits wiring to the next lighting pole is If desired, looped circuits wiring to the next lighting pole is If desired, looped circuits wiring to the next lighting pole is
possible. The cable of the armature shall be connected on the possible. The cable of the armature shall be connected on the possible. The cable of the armature shall be connected on the
outgoing terminals. outgoing terminals. outgoing terminals.
Fuses protect the installation against overload and short- Fuses protect the installation against overload and short- Fuses protect the installation against overload and short-
circuiting. circuiting. circuiting.
Explanation of symbols Explanation of symbols Explanation of symbols
This
EN-IEC 61439-2:2011 standards and meets the
requirements of the Low Voltage Directive 2014/35/EU.
2 , 2- 2 , 2- 2 , 2-
Read the installation guide before mounting the
2 , 1-2Nm 2 , 1-2Nm 2 , 1-2Nm
product. Unprofessional work activities on electrical
2, spring 2, spring 2, spring
installations may result in a threat of danger to the life
and health of human beings and livestock!
RoHS Directive 2015/863/EU
ELEQ states that it uses qualified components in its
products only from manufacturers which meet the
requirements of the European Directive for the
"Restriction of use of certain Hazardous Substances
5L4311..
WEEE Directive 2012/19/EU
Yes, 6A
This equipment should not be disposed as unsorted
Yes Yes
municipal waste. Contact a qualified recycler for
Yes Yes
disposal.
597gr
2 2 2
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333
This This product product product is is designed is designed designed according according according to to
EN-IEC 61439-2:2011 standards and meets the EN-IEC 61439-2:2011 standards and meets the
requirements of the Low Voltage Directive 2014/35/EU. requirements of the Low Voltage Directive 2014/35/EU.
Read the installation guide before mounting the Read the installation guide before mounting the
product. Unprofessional work activities on electrical product. Unprofessional work activities on electrical
installations may result in a threat of danger to the life installations may result in a threat of danger to the life
and health of human beings and livestock! and health of human beings and livestock!
RoHS Directive 2015/863/EU RoHS Directive 2015/863/EU
ELEQ states that it uses qualified components in its ELEQ states that it uses qualified components in its
products only from manufacturers which meet the products only from manufacturers which meet the
requirements of the European Directive for the requirements of the European Directive for the
"Restriction of use of certain Hazardous Substances "Restriction of use of certain Hazardous Substances
WEEE Directive 2012/19/EU WEEE Directive 2012/19/EU
This equipment should not be disposed as unsorted This equipment should not be disposed as unsorted
municipal waste. Contact a qualified recycler for municipal waste. Contact a qualified recycler for
disposal. disposal.
84024 84024 84024
/ EN12010 / EN12010
info@eleq.com www.eleq.com
84024 / EN2010
LS-84 Connection Box for LS-84 Connection Box for LS-84 Connection Box for
Public Lighting Public Lighting Public Lighting
Installation Guide Installation Guide Installation Guide
the to the the
LS-84 phase selectable LS-84 phase selectable LS-84 phase selectable
Read this installation guide before installing the product Read this installation guide before installing the product Read this installation guide before installing the product
/ EN12010
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333 info@eleq.com
5L4311 5L4311 5L4311
5L4311 5L4311 5L4311
5L4311WX 5L4311WX 5L4311WX
www.eleq.com