Advertisement
Quick Links
Technical Specification
Technical Specification
Technical Specification
Safety and environmental conditions
Safety and environmental conditions
CE marking
LV directive 2014/35/EU
Safety and environmental conditions
CE marking
LV directive 2014/35/EU
RoHS directive (EU) 2015/863
RoHS directive (EU) 2015/863
CE marking
LV directive 2014/35/EU
WEEE directive 2012/19/EU
WEEE directive 2012/19/EU
RoHS directive (EU) 2015/863
Standard
EN-IEC 61439-2:2011
Standard
EN-IEC 61439-2:2011
WEEE directive 2012/19/EU
Standard
EN-IEC 61439-2:2011
This product is designed to be safe under the following
This product is designed to be safe under the following
conditions:
conditions:
This product is designed to be safe under the following
conditions:
Specification
Specification
Environmental conditions
Environmental conditions
Specification
Operating temperature:
-5°C - +55°C
Operating temperature:
-5°C - +55°C
Environmental conditions
Relative humidity:
5% - 85%, non condensing
Relative humidity:
5% - 85%, non condensing
Operating temperature:
-5°C - +55°C
Protection degree:
IP20
Protection degree:
IP20
Relative humidity:
5% - 85%, non condensing
Installation class:
1 (protective earth)
Installation class:
1 (protective earth)
Protection degree:
IP20
Pollution degree:
2
Pollution degree:
2
Installation class:
1 (protective earth)
Application conditions
Application conditions
Pollution degree:
2
Umax:
Umax:
230V (L-N)
230V (L-N)
Application conditions
I
:
I
:
16A
16A
nA
nA
Umax:
230V (L-N)
Frequency:
Frequency:
50Hz
50Hz
I
:
16A
Protection:
Protection:
nA
Fuseholder 10x38
Fuseholder 10x38
Frequency:
50Hz
+Residual Current Device
+Residual Current Device
Protection:
Fuseholder 10x38
Strain relief:
Strain relief:
maximum 2 ground cables 23mm
maximum 2 ground cables 23mm
+Residual Current Device
and 2 light poles cords
and 2 light poles cords
Strain relief:
maximum 2 ground cables 23mm
Maximum wire cross section
Maximum wire cross section
Terminal 1, 2, 3, N, PE: 2x 4mm
Terminal 1, 2, 3, N, PE: 2x 4mm
and 2 light poles cords
and torque :
and torque :
0.6-0.8Nm, stripping length 9mm
0.6-0.8Nm, stripping length 9mm
Maximum wire cross section
Terminal 1, 2, 3, N, PE: 2x 4mm
PE: max 2x10mm
PE: max 2x10mm
and torque :
0.6-0.8Nm, stripping length 9mm
length 15mm
length 15mm
PE: max 2x10mm
Diameter ø (mm)
Diameter ø (mm)
99
99
length 15mm
280
Height (mm)
280
Height (mm)
Diameter ø (mm)
99
Storage
Storage
Height (mm)
280
Temperature:
-20°C - +70°C
Temperature:
-20°C - +70°C
Storage
Relative humidity:
5% - 85%, non condensing
Relative humidity:
5% - 85%, non condensing
Temperature:
-20°C - +70°C
Material:
PA 6.6, UL94 V2
Material:
PA 6.6, UL94 V2
Relative humidity:
5% - 85%, non condensing
Material:
PA 6.6, UL94 V2
Specifications
Specifications
5L6024
5L6024
Specifications
Fuse
10x38 mm, 6A
Fuse
10x38 mm, 6A
5L6024
Earth leakage circuit breaker
30mA
Earth leakage circuit breaker
30mA
Fuse
10x38 mm, 6A
Earth leakage circuit breaker
30mA
Please be aware, product liability, standards and warranty are all
Please be aware, product liability, standards and warranty are all
expired when modifications on the product are made.
expired when modifications on the product are made.
Please be aware, product liability, standards and warranty are all
expired when modifications on the product are made.
ELEQ reserves the right to carry out modifications on its products, in
ELEQ reserves the right to carry out modifications on its products, in
order to improve them, without prior notice.
order to improve them, without prior notice.
ELEQ reserves the right to carry out modifications on its products, in
order to improve them, without prior notice.
Safety instruction
Safety instruction
Safety instruction
All activities for installation, commissioning and maintenance
All activities for installation, commissioning and maintenance
of this connection box must be performed by qualified
of this connection box must be performed by qualified
All activities for installation, commissioning and maintenance
personnel that has the knowledge of applicable safety
personnel that has the knowledge of applicable safety
of this connection box must be performed by qualified
precautions. This guide assumes that the reader of this
precautions. This guide assumes that the reader of this
personnel that has the knowledge of applicable safety
document has sufficient electro-technical knowledge to
document has sufficient electro-technical knowledge to
precautions. This guide assumes that the reader of this
understand the content of this document.
understand the content of this document.
document has sufficient electro-technical knowledge to
understand the content of this document.
General
General
General
The LS-94 is a connection box for public lighting and can be
The LS-94 is a connection box for public lighting and can be
used in lighting poles, busshelter, billboard bw. The
used in lighting poles, busshelter, billboard bw. The
The LS-94 is a connection box for public lighting and can be
connection box should be mounted in a weather protected
connection box should be mounted in a weather protected
used in lighting poles, busshelter, billboard bw. The
and dry location. In the connection box the incoming (ground)
and dry location. In the connection box the incoming (ground)
connection box should be mounted in a weather protected
cable can be connected. If desired, looped circuits wiring to
cable can be connected. If desired, looped circuits wiring to
and dry location. In the connection box the incoming (ground)
the next lighting pole is possible. The cable of the armature
the next lighting pole is possible. The cable of the armature
cable can be connected. If desired, looped circuits wiring to
should be connected on the outgoing terminals.
should be connected on the outgoing terminals.
the next lighting pole is possible. The cable of the armature
should be connected on the outgoing terminals.
A fuse protect the installation against overload and short-
A fuse protect the installation against overload and short-
circuiting. And a RCD against earth fault.
circuiting. And a RCD against earth fault.
A fuse protect the installation against overload and short-
circuiting. And a RCD against earth fault.
Explanation of symbols
Explanation of symbols
Explanation of symbols
2
2
2
2,
2-4Nm, stripping
2,
2-4Nm, stripping
2,
2-4Nm, stripping
WEEE Directive 2012/19/EU
This equipment should not be disposed as unsorted
municipal waste. Contact a qualified recycler for
disposal.
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333
This
product
is
designed
according
This
product
is
designed
according
EN-IEC 61439-2:2011 standards and meets the
EN-IEC 61439-2:2011 standards and meets the
This
product
is
designed
according
requirements
of
the
Low
Voltage
requirements
of
the
Low
Voltage
Directive
EN-IEC 61439-2:2011 standards and meets the
2014/35/EU.
2014/35/EU.
requirements
of
the
Low
Voltage
2014/35/EU.
Read the installation guide before mounting the
Read the installation guide before mounting the
product. Unprofessional work activities on electrical
product. Unprofessional work activities on electrical
Read the installation guide before mounting the
installations may result in a threat of danger to the life
installations may result in a threat of danger to the life
product. Unprofessional work activities on electrical
and health of human beings and livestock!
and health of human beings and livestock!
installations may result in a threat of danger to the life
and health of human beings and livestock!
RoHS Directive (EU) 2015/863
RoHS Directive (EU) 2015/863
ELEQ states that it uses qualified components in its
ELEQ states that it uses qualified components in its
RoHS Directive (EU) 2015/863
products only from manufacturers which meet the
products only from manufacturers which meet the
ELEQ states that it uses qualified components in its
requirements of the European Directive for the
requirements of the European Directive for the
"Restriction of use of certain Hazardous Substances
"Restriction of use of certain Hazardous Substances
products only from manufacturers which meet the
requirements of the European Directive for the
"Restriction of use of certain Hazardous Substances
WEEE Directive 2012/19/EU
This equipment should not be disposed as unsorted
municipal waste. Contact a qualified recycler for
WEEE Directive 2012/19/EU
disposal.
This equipment should not be disposed as unsorted
municipal waste. Contact a qualified recycler for
disposal.
info@eleq.com
www.eleq.com
84163
84163
84163 / EN2310
LS-94 Connection Box for
LS-94 Connection Box for
LS-94 Connection Box for
Public Lighting
Public Lighting
Public Lighting
Installation Guide
Installation Guide
Installation Guide
to
the
to
the
to
the
Directive
Directive
LS-94
LS-94
LS-94
Read this installation guide before installing the product
Read this installation guide before installing the product
Read this installation guide before installing the product
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333
info@eleq.com
/ EN2310
/ EN2310
5L6024
5L6024
5L6024
www.eleq.com
Advertisement
Related Manuals for ELEQ LS-94
Summary of Contents for ELEQ LS-94
- Page 1 General The LS-94 is a connection box for public lighting and can be This product is designed to be safe under the following The LS-94 is a connection box for public lighting and can be LS-94 Connection Box for...
- Page 2 Wiring Diagram Maintenance and inspection Wiring Diagram Ensure a safe working area during inspection of the Wiring Diagram Maintenance and inspection Maintenance and inspection connection box. Disconnect the power of the primary circuit Ensure a safe working area during inspection of the Ensure a safe working area during inspection of the and make sure it can not be enabled unintentionally, or follow connection box.
Need help?
Do you have a question about the LS-94 and is the answer not in the manual?
Questions and answers