Safety Advice Relating To Cordless Drill Drivers; Use And Handling Of The Cordless Electrical Power Tool - Parkside PAS 3.6 A1 - MANUAL 7 Manual

Pull the mains plug out of the socket
and / or remove the rechargeable bat-
tery before you make any adjustments
to the device, change accessories or
when the device is put away.
When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone use
the device if he or she is not familiar
with it or has not read the instructions
and advice.
Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device.
Keep cutting tools clean and sharp.
Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this par-
ticular type of device. In doing this, take
into account the working conditions
and the task in hand.
5. Use and handling of the cord-
less electrical power tool
Charge a rechargeable battery unit
using only the charger recommended
by the manufacturer.
Only the rechargeable battery units
supplied are to be used with an elec-
trical power tool.
When they are not being used, store
rechargeable battery units away from
paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged.
Fluids may leak out of rechargeable
battery units if they are misused. If
this happens, avoid contact with the
fluid. If contact occurs, flush the affect-
ed area with water. Seek additional
medical help if any of the fluid gets
into your eyes.
Safety advice relating
to cordless drill drivers
½
Securely support the workpiece.
½
Hold the electrical power tool firmly.
½
If the inserted tool jams, switch off
the electrical power tool immediately.
The inserted tool may
WARNING!
strike concealed electricity cables,
therefore when working you must
hold the electrical power tool by the
insulated handle areas only.
½
Before you carry out any tasks on the
device, transport or store it, make
sure that the direction of rotation