Rutland County Porch - 1.8M Assembly Instructions Manual

Before you commence the assembly process, we strongly recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance or you believe anything is missing, you
can find our contact details on the final page of these instructions.
As with all DIY projects ensure that all necessary health and safety precautions are taken such as, but
not limited to, the wearing of gloves, goggles, masks and appropriate footwear – particularly if you
intend to use power tools. For safety reasons, you will also need a stable platform or scaffold tower to
complete this project.
If for any reason you don't feel confident in completing this project, we would recommend consulting a
qualified professional to undertake the work.
Tools required:
Assembly Instructions
Rutland Porch – 1.8M
No2 Pozidriv screwdriver (or electric driver), Measuring tape,
Scissors or craft knife, Hammer, Spirit level or Laser, Craft knife,
10mm socket or drive bit, pencil or chalk.
The Rutland Porch Range