Rutland County Rutland Box Lean-to Pergola Assembly Instructions

Before you commence the assembly process, we recommend that you read these instructions thoroughly beforehand to
familiarise yourself with the assembly process and to also check that you have the correct components. If for any reason you
need assistance, you can find our contact details on the final page of these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible, with sufficient space. You
will also require the assistance of 2 adults to complete assembly safely.
Please note: 1) For a free-standing pergola you can remove up to 600mm from the bottom of each post prior to commencing
construction.
2) Wall fixings are not included.

Package contents

2 x Posts
1 x Runner
1 x Wall plate
2 x Edge rafters
4 x Rafters
6 x 75mm screws
8 x 100mm Coach Screws
8 x 120mm Coach Screws
Assembly Instructions
Rutland Box Lean-to Pergola

Tools required

10mm socket drive or spanner
#2 Pozidriv screwdriver
Platform or Step ladder
Spirit level or laser level
The Rutland Box Lean-to Pergola
1